GCSE · Maths · OCR · Spec J560

Circle nomenclature

Drag the ends of one line round a circle and its name changes from chord to diameter. Then compare it with the line along the bottom that touches only once: a tangent. Then meet the one shape that has two names at the same time.

Maths · Circles

Move the line, change its name
6.9 units4.0 unitsOKPQ

Length PQ (rounded to 1 d.p.) 6.9 units. Radius OP (rounded to 1 d.p.) 4.0 units. Relationship: When P and Q are different points on the circle, PQ is a chord. If PQ also passes through the centre O, it is a diameter, and its length reads as twice the radius. The line along the bottom meets the circle only at K, and it carries on past both edges without meeting the circle again: that is a tangent.

Length PQ (rounded to 1 d.p.)6.9 unitsRadius OP (rounded to 1 d.p.)4.0 unitsDrag P and Q round the circle. Can you make PQ a diameter?

When P and Q are different points on the circle, PQ is a chord. If PQ also passes through the centre O, it is a diameter, and its length reads as twice the radius. The line along the bottom meets the circle only at K, and it carries on past both edges without meeting the circle again: that is a tangent.

Not to scale: the units are only for comparing the readouts. The long line along the bottom carries on past both edges of the picture.

Maths · Circles

Is it really a tangent?

Your friend draws a short line segment that touches a circle at one point and shouts, "Tangent!" You picture the line carrying on in both directions.

Which idea about tangents is closest to what you think?
How sure are you?

Maths · Circles

Length or area?

Pick a word, then put it where it belongs: a length inside the circle, a length on or outside it, or an area.

Still to sort

A length inside the circle (0)

A line segment that sits within the circle.

A length on or outside the circle (0)

Runs along the circle itself, or touches it from outside.

An area (0)

A region you could shade in.

8 of 8 still to sort.

Maths · Circles

Sector, segment, or both?

A sector is an area formed by two radii and an arc. A segment is an area cut off by a chord. Tick every set each item belongs to, or tick none if it is not an area at all.

  • A Sector
  • B Segment
  1. A minor sector (under 50% of the area of the circle)
  2. A major segment (over 50% of the area of the circle)
  3. A chord
  4. A semicircle (exactly 50% of the area of the circle)
  5. A major sector (over 50% of the area of the circle)
  6. An arc
  7. A minor segment (under 50% of the area of the circle)

Predict, then check

Trace each leg of the angle to the point where it stops.

A, B and Y are three points on the circumference of a circle with centre O. The lines YA and YB are the two legs of angle AYB. What is angle AYB subtended by?

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

Move one line round a circle and watch its name change.

What you need to know

  • Every circle word is one of three kinds: a length inside the circle, a length on or outside it, or an area.
  • From the centre to the circumference is a radius, and the diameter is double the length of a radius.
  • Have a goA diameter is 14 cm long. How long is the radius?

    7 cm

    The diameter is double the length of a radius, so the radius is half of it: 14 ÷ 2 = 7 cm.

  • Any line segment with both ends on the circumference is a chord, and one through the centre is a diameter.
  • The circumference is the distance around the circle, its perimeter, and an arc is part of it.
  • Tangents meet the circle exactly once. If extending the line would cut the circle again, it is not a tangent.
  • Have a goYour friend draws a short line that touches a circle once and calls it a tangent. You extend it and it crosses the circle a second time. Who wins?

    You do. It is not a tangent.

    A tangent meets the circle exactly once even when extended. This line meets the circle again, so touching once as drawn was not enough.

  • Two radii and an arc make a sector. A chord dividing the circle in two makes a segment. Both are areas.
  • Minor means under 50% of the circle's area, and major means over 50%, for sectors and segments alike.
  • Have a goA region made from two radii and an arc takes up 40% of the circle's area. Minor or major?

    A minor sector.

    Two radii and an arc make a sector, and 40% is under 50%, so it is minor.

  • Exactly 50% is a semicircle, and it counts as a special sector and a special segment.
  • An angle is subtended by a line segment or curve when its legs meet the two endpoints of that line segment or curve.

The big picture

Every word for a part of a circle answers one question: is it a length inside the circle, a length on or outside it, or an area? You will drag the ends of a line to see chord and diameter, compare them with the tangent along the bottom, sort all eight names, untangle sectors and segments, and learn what 'subtended' means.

Key points

1Radius, diameter and chord are lengths inside the circle. Circumference, arc and tangent are lengths on or outside it. Sector and segment are areas.
2A chord needs both ends on the circumference. If it also passes through the centre it is a diameter, which is double the length of a radius.
3A line that touches the circle once as drawn is a tangent only if it still meets the circle just once when extended.
4A minor sector or segment has under 50% of the area, a major one has over 50%, and a semicircle has exactly 50% and is both a sector and a segment.

Worked example

Problem

A and B are points on the circumference of a circle with centre O. The line segment AB passes through O and is 15 cm long. (a) Name the line AB. (b) Work out the length of the radius OA. (c) AB divides the circle into two parts. Name each part.

⚠ Watch out

Thinking a chord must go through the centre, or that any line touching the circle once is a tangent. Also swapping sector (two radii) and segment (a chord).

🧠

Memory hook

Two ends on the rim: chord. Through the middle: diameter. Touches once, however far you go: tangent. And the semicircle is the one with two names.

✓

Check yourself

Sketch a circle with a chord that is not a diameter, a diameter and a tangent. Then shade a minor sector. Which drawings are lengths?

Flashcards

(15)
Which circle words are lengths inside the circle?
The radius, the diameter and the chord.
Which circle words are lengths on or outside the circle?
The circumference, the arc and the tangent.
Which circle words are areas?
The sector and the segment.
What is a radius?
A line segment that goes from the centre of the circle to its circumference.
How does the diameter compare with a radius?
The diameter is double the length of a radius.
What is a chord?
Any line segment whose two endpoints touch the circumference. It does not need to pass through the centre.
When is a chord a diameter?
When it passes through the centre of the circle.
What is the circumference?
The distance around the circle, or the perimeter of the circle.
What is an arc?
Part of the circumference of a circle.
When is a line a tangent?
When it meets the circle exactly once on its circumference, even when extended.
What makes a sector?
An area formed by two radii and an arc joined together.
How do you get a segment?
Cut a circle with a chord. Each of the two parts is a segment, and a segment is an area.
How do you tell a minor sector or segment from a major one?
Minor is under 50% of the area of the full circle. Major is over 50%.
What is special about a semicircle?
It has exactly 50% of the area, and it is a special sector and a special segment.
When is an angle subtended by a line segment or curve?
When the legs of the angle meet the endpoints of that segment or curve.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More OCR GCSE Maths topics

See the full OCR Maths curriculum →

How this lesson was checked. This OCR GCSE Maths (specification J560)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 17 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students