GCSE · Maths · OCR · Spec J560

Geometrical instruments

Compasses are secret distance-keepers. See why, and you can build a triangle from three lengths, or spot three that never will.

Maths · Compasses

Find the third corner
6.00 cm8.00 cm4.11 cmABC

AB 6.00 cm. AC 8.00 cm. BC 4.11 cm. Relationship: C is always 8 cm from A, wherever it sits on the ring. Only BC changes.

AB6.00 cmAC8.00 cmBC4.11 cmDrag C, or use the arrow keys

C is always 8 cm from A, wherever it sits on the ring. Only BC changes.

AB is 6 cm. The dotted ring is what a pair of compasses opened to 8 cm would draw with its needle at A, so every point on it is 8 cm from A. Drag C round the ring until BC reads 10.00 cm. Then try to make BC read 14.00 cm, and 16.00 cm. The readouts are rounded to 2 decimal places and the size on your screen is not to scale.

The opening

What have I drawn?

You open your compasses until the needle tip and the pencil tip are 6 cm apart. You put the needle on a point and swing the pencil all the way round to draw one full circle.

Which idea is closest to what you think you have drawn?
How sure are you?

Check the method

Which step spoils the circle?

Sam is drawing a circle of radius 5 cm with a pair of compasses. Read Sam's four steps and tap the one that could spoil the circle.

Sam's steps — which line goes wrong?

Worked construction: SAS

Problem

Construct triangle ABC with AB = 6 cm, angle BAC = 50° and AC = 5 cm, using a ruler and a protractor.

Worked construction: ASA

Problem

Construct triangle PQR with PQ = 7 cm, angle QPR = 40° and angle PQR = 65°.

Predict, then check

Does pointing a different way mean drawn wrongly?

You accurately draw a triangle with sides 6 cm, 8 cm and 10 cm. A classmate says theirs has the same three sides, but it is turned round or flipped over so it points a different way. Is theirs wrong?

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

Compasses, ruler and protractor: draw circles and triangles you can trust.

What you need to know

  • Compasses draw circles and arcs. A handle to hold, a holder for the pencil, and a needle to keep it in place.
  • A radius is any line from the centre to a point on the circumference. An arc is part of the circumference.
  • Set the needle-to-pencil gap equal to the radius. Opened to 6 cm, compasses draw radius 6 cm, not diameter or circumference 6 cm.
  • Have a goMaya opens her compasses to 4 cm and says, 'My circle will be 4 cm across.' How wide is it, edge to edge through the centre?

    8 cm, because 4 cm is the radius.

    The opening runs from the centre to the edge, so it is the radius. Straight across through the centre is two radii.

  • Rest the pencil gently, because pushing hard can make it slip. Turn by the handle, not both legs, then check radii with a ruler.
  • Every point on a circle is the same distance from its centre, so compasses can find points a set distance from a given point.
  • Have a goPoint P is exactly 5 cm from a point Q. What shape do all the places P could be make?

    A circle of radius 5 cm, centred on Q.

    Every point on a circle is the same distance, the radius, from its centre, so all the points exactly 5 cm from Q lie on that circle.

  • SSS: draw one side, then swing arcs from both ends using the other two lengths. Either crossing gives a congruent triangle.
  • Not any three lengths work. 6, 8 and 14 cm squash flat (6 + 8 = 14), and 6, 8 and 16 cm never meet.
  • Have a goYour friend insists 5 cm, 5 cm and 12 cm will make a triangle 'if you draw really carefully'. Can careful drawing rescue it?

    No. 5 + 5 = 10 is less than 12, so the arcs never meet.

    Two short arcs can't reach across a long side, however neatly you draw. It is the same reason 6 cm, 8 cm and 16 cm fail.

  • Given an angle, use a ruler and protractor. SAS is two sides and the angle between; ASA is two angles and the side between.
  • Decide whether the angle is acute or obtuse before reading the protractor, because an acute angle can't measure 122°.
  • Shapes that fit exactly on each other after a turn, flip or slide are congruent. A turned drawing can be right: measure sides and angles to check.

The big picture

A pair of compasses draws a circle whose radius is the opening between the needle and the pencil. Every point on the circle is that same distance from the centre, so two arcs from the two ends of a side find a triangle's third vertex (SSS), unless the two shorter sides are too short to reach. When an angle is given, a protractor and ruler build the triangle (SAS and ASA). A drawing is checked by measuring, and a turned or flipped drawing can still be correct.

Key points

1The opening of the compasses is the radius of the circle they draw.
2Every point on a circle is the same distance from its centre, so two arcs find the point that is the right distance from both ends.
3SSS needs the arcs to cross: they cross only when the two shorter sides together are longer than the third.
4SAS and ASA use a ruler and protractor, reading the protractor scale that fits the type of angle.
5A drawing can be turned or flipped and still be right. Check it by measuring its sides and angles.

Worked example

Problem

You are measuring an angle that is clearly bigger than a right angle. Where its line crosses the protractor, one scale reads 134° and the other reads 46°. Which reading is the size of the angle, and how do you know?

⚠ Watch out

Thinking compasses opened to 6 cm draw a circle 6 cm across. The opening is the radius, so that circle is 12 cm across. A second slip is thinking any three lengths make a triangle: the arcs only cross when the two shorter sides together are longer than the third.

🧠

Memory hook

The opening is the radius: the compasses keep the distance for you.

✓

Check yourself

Cover the page. Explain why the opening of the compasses is a radius, and how two arcs find the third vertex of a 4 cm, 5 cm, 6 cm triangle.

Flashcards

(14)
What does a pair of compasses draw, and what are its three working parts?
It draws circles and arcs. It has a handle for holding, a holder for the pencil and a needle that keeps it in place on the paper.
What is a radius, and what is an arc?
A radius is any line segment from the centre of a circle to a point on its circumference. An arc is part of the circle's circumference.
You want a circle of radius 6 cm. What do you set the compasses to?
Open them so the needle tip and pencil tip are 6 cm apart. That gap is the radius, not the diameter or the circumference.
What should you do with the pencil while drawing, and why?
Rest it gently on the paper. Pushing hard can make the pencil or the needle slip.
How should you turn the compasses, and why?
Turn them by the handle, or turn the paper. Holding both legs can change the opening part-way round.
How can you check a circle you have drawn?
Measure radii with a ruler. They should all match the opening you set.
Why can compasses find a point a set distance from another point?
Every point on a circle is the same distance, the radius, from its centre. An arc marks every point at that distance.
SSS: how do you construct the triangle?
Draw one side with a ruler, then draw arcs from each end with radii equal to the other two lengths. A crossing point is the third vertex, and either crossing gives a congruent triangle.
Why do sides of 6 cm, 8 cm and 14 cm, and 6 cm, 8 cm and 16 cm, not make triangles?
With 6, 8 and 14 the arcs meet only on the first side (6 + 8 = 14), giving a straight line. With 6, 8 and 16 the arcs never meet, because 6 + 8 is less than 16.
When do you use a protractor and ruler instead of compasses?
Compasses can build certain angles but not every angle. Use a protractor and ruler for SAS (two sides and the angle between) or ASA (two angles and the side between).
ASA: how do you find the third vertex?
Draw the known side, then at each end use the protractor to draw a line at the given angle, longer than needed. The point where the lines cross is the third vertex.
In angle OMN, where is the angle?
At M. In three-letter notation the middle letter names the vertex.
Before reading a protractor, what should you decide first?
Whether the angle is acute or obtuse, so you read the right scale. An acute angle can't measure 122°.
When are two shapes congruent, and can an accurate drawing be turned or flipped?
They are congruent if one fits exactly on top of the other by rotation, reflection or translation. A turned or flipped drawing can still be correct: check its sides with a ruler and its angles with a protractor.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More OCR GCSE Maths topics

See the full OCR Maths curriculum →

How this lesson was checked. This OCR GCSE Maths (specification J560)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 17 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students