GCSE · Physics · AQA · Spec 8463

Temperature changes and specific heat capacity (revisited)

Give 1 kg of water and 1 kg of iron the same 100 kJ: water warms about 24 °C, iron over 220 °C. Why?

Same energy, different temperature rise

0255075100065130195260Energy supplied to 1 kg (kJ)Temperature rise (°C)4200 J/kg °CSpecific heat capacitySame 50 kJ. Which materialrises most?
Material (1 iron, 2 glass, 3 olive oil, 4 water) 4

Material (1 iron, 2 glass, 3 olive oil, 4 water): 4. Specific heat capacity: 4200 J/kg °C

Each line shows 1 kg of one material being given energy. The height of the line is how far its temperature rises. Slide through the four materials, then look at the dot at 50 kJ.

Watch out: These lines show how far the temperature rises, not the temperature itself. Every line is straight: double the energy and the rise doubles, whatever the material.

The specific heat capacity equation

ΔE = m × c × Δθ

The line you just moved is the picture; this is the rule. Energy needed = how much stuff × how stubborn it is × how far you want the temperature to move.

ΔE = change in thermal energy, in joules (J). m = mass, in kilograms (kg). c = specific heat capacity, in J/kg °C. Δθ = temperature change, in °C. Specific heat capacity c is the energy needed to change the temperature of 1 kg of the material by 1 °C.

Physics · Rearranging

Find the mass of water

A kettle transfers 189 kJ to some water and warms it from 15 °C to 90 °C. The specific heat capacity of water is 4200 J/kg °C. What is the mass of the water?

  1. We want the mass, and we know the energy, c and both temperatures. So start from ΔE = m c Δθ.Four quantities in the equation, one unknown.
  2. missing step
Which line is step 2?

Physics · Check the working

Where did this answer lose the mark?

A 2 kg block of iron (c = 450 J/kg °C) is heated from 20 °C to 50 °C. How much energy does it need?

A student's answer — which line goes wrong?

Hot metal in cool water

?

Reason it through

Why can the energy gained by the water tell us the specific heat capacity of a hot metal dropped into it?

Link 1 of 4

First link · your turn

A hot steel block is dropped into cooler water. Which way does energy move, and how?

2
Locked — reveal the link above first
3
Locked — reveal the link above first
4
Locked — reveal the link above first

Physics · Temperature or energy?

What is heating actually doing?

A lump of ice at 0 °C is heated and melts into water at 0 °C. The thermometer hasn't budged the whole time it has been melting.

Which is closest to what you think is going on?
How sure are you?

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

Why iron heats up so much faster than water, and how to put a number on it.

What you need to know

  • Temperature says how hot something is, and it's linked to the kinetic energy of its individual particles.
  • Internal energy is the kinetic plus potential energy of all the particles in a substance, added together.
  • Put a hot object in cooler water and energy moves by thermal conduction until both reach the same temperature.
  • The energy needed to warm something is directly proportional to its mass and to its temperature change.
  • Have a goYour friend fills the same kettle with twice as much water and swears it will boil in the same time. How long will it really take?

    About twice as long.

    The energy needed is directly proportional to the mass, so twice the water needs twice the energy, and the same kettle delivers it at the same rate.

  • Specific heat capacity is the energy needed to change 1 kg of a material by 1 °C. Unit: J/kg °C.
  • A bigger specific heat capacity means more energy per degree. Water's is particularly high; metals' are lower than most non-metals.
  • Have a goThe same energy goes into 1 kg of water and 1 kg of iron. Which one ends up with the bigger temperature rise?

    The iron.

    Iron has the smaller specific heat capacity, so each degree costs less energy and the same energy buys more degrees.

  • The equation is change in thermal energy = mass × specific heat capacity × temperature change: ΔE = m c Δθ.
  • Temperature change is final temperature minus starting temperature. Work that out first, then rearrange if you need to.
  • Have a goA block warms from 18 °C to 43 °C. What number goes in for the temperature change?

    25 °C.

    It is final minus start, 43 − 18 = 25. Using 43 means using where it ended up, not how far it rose.

  • When hot metal cools in water, the energy lost by the metal equals the energy gained by the water.
  • Heating raises internal energy, which can raise the temperature or change the state, like ice at 0 °C melting to water at 0 °C.

The big picture

Specific heat capacity measures how hard it is to change a material's temperature: the energy to change 1 kg by 1 °C, in J/kg °C. The energy to heat or cool something is ΔE = m c Δθ, with Δθ = final − start. In a hot metal and cool water problem, the energy lost by the metal equals the energy gained by the water. Heating raises internal energy, which may raise the temperature or change the state.

Key points

1Temperature is how hot a substance is, linked to the kinetic energy of its particles. Internal energy is the kinetic plus potential energy of all of them.
2Hot object in cooler water: energy moves by thermal conduction until both reach the same temperature (thermal equilibrium).
3Energy needed is directly proportional to mass and to temperature change.
4Specific heat capacity is the energy to change 1 kg of a material by 1 °C, in J/kg °C. The bigger it is, the harder the temperature is to change.
5ΔE = m c Δθ, with Δθ = final temperature − starting temperature. Convert kJ to J first.
6Energy lost by one object equals energy gained by the other, because of conservation of energy.
7Heating raises internal energy: either the temperature rises, or the state changes at constant temperature.

Worked example

Problem

A 1.5 kg block of glass is heated and its temperature rises by 80 °C. Glass has a specific heat capacity of 840 J/kg °C. How much energy does it need?

⚠ Watch out

Putting the final temperature into the equation instead of the temperature change, and forgetting to turn kJ into J before using c. Also thinking temperature and energy are the same thing: heating raises internal energy, which doesn't always raise the temperature.

🧠

Memory hook

Stubborn materials cost lots of energy per degree. ΔE = m c Δθ, and Δθ is final MINUS start.

✓

Check yourself

Cover the page. Same mass, same energy, but one block rises three times as many degrees. What does that say about their specific heat capacities?

Flashcards

(12)
What does temperature tell you?
How hot a substance is. It is related to the kinetic energy of its individual particles.
What is internal energy?
The sum of the kinetic energy and the potential energy of all the particles the substance is made of.
A hot object is put into cooler water. What happens?
Energy is transferred by thermal conduction from the object to the water. The object's temperature decreases and the water's increases until they are the same (thermal equilibrium).
What does the energy needed to warm something depend on?
It is directly proportional to the mass and directly proportional to the temperature change.
What is specific heat capacity?
The change in internal energy when 1 kg of a material changes temperature by 1 °C. It measures how hard the temperature is to change.
What is the unit of specific heat capacity?
Joules per kilogram per degree Celsius, J/kg °C.
What does a larger specific heat capacity mean?
More energy is needed to raise the temperature by 1 °C, and more energy is transferred to the surroundings when it falls by 1 °C.
Write the specific heat capacity equation with units.
ΔE = m c Δθ. ΔE in joules (J), m in kilograms (kg), c in J/kg °C, Δθ in °C.
How do you find the temperature change Δθ?
Final temperature minus starting temperature.
Why can 'energy lost = energy gained' be used in mixing problems?
Because of conservation of energy: the energy that leaves one object is transferred to the other.
Which material has a particularly high specific heat capacity, and what about metals?
Water has a particularly high one. Metals have lower specific heat capacities than most non-metals.
What two things can heating do to a substance's particles?
Raise their kinetic energy, which raises the temperature, or raise their potential energy, which does not raise the temperature but can cause a change of state.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Physics topics

See the full AQA Physics curriculum →

How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 5 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students