GCSE · Chemistry · AQA · Spec 8462

Corrosion and its prevention (chem only)

Scratch the paint on an iron railing and rust can start at the scratch. Scratch a zinc coating and the iron stays protected. Same iron. What's different?

Chemistry · Corrosion

Two jobs, six methods

Rusting needs oxygen and water to reach the iron. So a rust-stopper has two possible jobs: block them, or offer a more reactive metal to corrode first. Which job does each method do? Tick one set, both, or neither.

  • A Coats the metal so oxygen and water can't reach it
  • B A more reactive metal corrodes instead
  1. Paint
  2. A layer of oil or grease
  3. A plastic coating
  4. Zinc blocks bolted to a steel ship's hull
  5. Galvanising: a layer of zinc on iron or steel
  6. Silica gel in a sealed box with an iron tool

Four nails, four conditions

Tap a nail to see what it had, and what it was missing.

Chemistry · Words that get mixed up

Corrosion, rusting, tarnish: which sounds like you?

Three words get swapped all the time: corrosion, rusting and tarnishing. Pick the sentence closest to what you would say.

Which one sounds most like you?
How sure are you?

How rusting actually happens

e⁻ through the ironSalty water: an electrolyteAnode: iron loses electronsAnodeCathode: oxygen gainselectronsCathode

Electrolyte: Salty water: an electrolyte (aqueous). Cathode: oxygen gains electrons, half-equation O₂ + 2H₂O + 4e⁻ → 4OH⁻, product OH⁻ ions (reduction: gain of electrons). Anode: iron loses electrons, half-equation Fe → Fe²⁺ + 2e⁻, product Fe²⁺ ions (the iron is oxidised). Fe²⁺ (positive) migrates to the cathode. OH⁻ (negative) migrates to the anode. e⁻ through the iron in the external circuit: anode to cathode. static

electrons in the metal, ions in the water

Cathode: oxygen gains electrons

O₂ + 2H₂O + 4e⁻ → 4OH⁻

Product: OH⁻ ions (reduction: gain of electrons)

Anode: iron loses electrons

Fe → Fe²⁺ + 2e⁻

Product: Fe²⁺ ions (the iron is oxidised)

Next, Fe²⁺ + 2OH⁻ → Fe(OH)₂, which reacts with more oxygen: 4Fe(OH)₂ + O₂ → 2Fe₂O₃·H₂O + 2H₂O. That last substance is hydrated iron(III) oxide: rust.

Watch out: Ions don't carry electrons. The electrons move through the iron itself; the ions move through the water.

Two oxide layers, two outcomes

Aluminium oxide layervsRust on iron

Both metals react with oxygen. What the oxide does next is the whole story.

Focus

What the layer is like

Aluminium oxide layer

Thin and stable: aluminium oxide, Al₂O₃

Rust on iron

Porous: hydrated iron(III) oxide

The insight

Chromium and titanium also have protective oxide layers, and chromium is why stainless steel resists corrosion.

How it sits on the metal

Aluminium oxide layer

Sticks strongly to the metal

Rust on iron

Flakes off

Effect on further corrosion

Aluminium oxide layer

Physical barrier: oxygen and water can't reach the metal beneath, so corrosion stops

Rust on iron

Doesn't block them: corrosion carries on

Predict, then check

Two iron gates. Both are scratched right through the coating. Which one has a problem?

One gate is painted and the other is galvanised. Each has a scratch down to the iron. What happens at each scratch?

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

What you need to know

  • Corrosion is a metal slowly reacting with its surroundings. The corrosive hazard symbol is different: it warns of damage on contact.
  • Rusting is corrosion of iron and steel only, and it needs iron, oxygen and water all together.
  • Have a goMaya says her aluminium bike frame is rusting, and she sounds very sure. Is she using the right word?

    No. Rusting is only iron and steel.

    Other metals can corrode, but rusting is the word for iron and steel reacting with water and oxygen.

  • Overall, iron + oxygen + water makes hydrated iron(III) oxide, which is rust. The iron gains oxygen, so it is oxidised.
  • Salty water makes rusting faster, because it is an electrolyte: a solution with ions free to move.
  • Have a goTwo matching iron nails are left out in the same weather. One is dipped in salty water first. Which should rust faster?

    The one dipped in salty water.

    Salty water is an electrolyte, and its free-moving ions help the reactions of rusting go faster.

  • Some metals grow a thin oxide layer that sticks to the metal and keeps oxygen and water out. Aluminium oxide, Al₂O₃, is one.
  • Rust is the odd one out. It is porous and flakes off, so the corrosion carries on.
  • Barriers like oil, grease, paint or plastic keep oxygen and water off. Silica gel or calcium chloride dry the air in sealed spaces.
  • Have a goAn iron tool lives in a sealed box with tubs of silica gel. Which of rusting's three ingredients are the tubs taking away?

    The water.

    Silica gel absorbs moisture and keeps the air dry, so the water that rusting needs is missing.

  • In sacrificial protection, a more reactive metal corrodes instead of the steel. Zinc blocks on a ship's hull do this.
  • Galvanising coats iron or steel in zinc. It's a barrier, and if scratched the more reactive zinc corrodes first.
  • Electroplating uses electricity to coat an object, the cathode, in a solution of ions of the plating metal. It is expensive.

The big picture

Corrosion is the gradual deterioration of a metal as it reacts with substances in its environment. Rusting is the version that affects only iron and steel, and it needs oxygen and water together; salty water, an electrolyte, speeds it up. Some metals, such as aluminium, grow a thin oxide layer that sticks and protects them, but rust is porous and flakes off. Rust prevention either keeps oxygen and water away from the iron or lets a more reactive metal corrode in its place, and galvanising does both.

Key points

1Corrosion is the gradual deterioration of a metal as it reacts with substances in its environment, such as oxygen. Rusting is corrosion of iron and steel only, and needs iron, oxygen and water together.
2The corrosive hazard symbol warns about substances that damage tissue and materials on contact. Corrosion is slow, and tarnish is only a thin discoloured surface layer.
3Iron + oxygen + water → hydrated iron(III) oxide, which is rust. Salty water, an electrolyte, speeds rusting up.
4A thin, stable oxide layer that sticks strongly protects its metal, as on aluminium, chromium and titanium. Rust is porous and flakes off, so corrosion continues.
5Prevent rusting by keeping out oxygen or water (oil, grease, paint, plastic, desiccants) or with sacrificial protection by a more reactive metal such as zinc. Coatings need regular maintenance.
6Galvanising uses both ideas. Electroplating makes the object the cathode and is expensive. Stainless steel resists corrosion because chromium forms a protective oxide layer, but not all alloys beat pure metals.

Worked example

Problem

A steel boat is kept in salty water. Its owner wants to stop the hull rusting. Suggest two protections and explain how each one works.

⚠ Watch out

Saying that every metal rusts, or that every alloy resists corrosion better than a pure metal. Rusting is only iron and steel. Stainless steel resists corrosion because its chromium forms a protective oxide layer, but not all alloys do.

🧠

Memory hook

Rust needs a trio: iron, oxygen, water. Take one away, or give a more reactive metal the job of corroding first.

✓

Check yourself

Without looking back: name one method that works only as a barrier and one that works only by sacrifice. Then say which method manages both, and why.

Flashcards

(15)
What is corrosion?
The gradual deterioration of a metal as it reacts with substances in its environment, for example when it oxidises in air. It weakens structures.
What does the corrosive hazard symbol warn about?
Substances that can damage living tissue and materials immediately on contact. That is not corrosion, which is gradual.
What three things does rusting need?
Iron (or steel), oxygen and water, all present together.
Write the word equation for rusting.
Iron + oxygen + water → hydrated iron(III) oxide (rust).
What is an electrolyte?
A solution containing ions that are free to move, so it can conduct electricity.
Why does aluminium resist corrosion?
It forms a thin aluminium oxide layer, Al₂O₃, that sticks strongly to the metal and prevents further oxidation and corrosion.
Why doesn't rust protect iron?
Rust is porous and flakes off, so fresh iron is exposed and corrosion carries on.
What is tarnishing?
A thin discoloured layer forming on a metal's surface after a reaction with the environment. It causes no structural damage, and polish removes it from silver.
Give two examples of desiccants.
Silica gel and calcium chloride.
What is sacrificial protection?
A more reactive metal corrodes in place of the metal you want to protect, like zinc blocks on a steel ship's hull.
In galvanising, why does scratched iron stay protected?
The more reactive zinc corrodes instead of the iron. While the coating is intact, the zinc is also a barrier.
In electroplating, which part is the cathode, and what is the electrolyte?
The object to be plated is the cathode. The electrolyte is a solution of ions of the plating metal, such as Cu²⁺ for copper.
Why is electroplating used, and what is its drawback?
It improves appearance and/or corrosion resistance, but it needs specialist equipment and electricity, so it is expensive.
Why does stainless steel resist corrosion?
Chromium in it forms a protective oxide layer. Not all alloys resist corrosion better than pure metals.
Why do paint and plastic coatings need regular maintenance?
If one is scratched, oxygen and water can reach the metal at that spot and it starts to corrode.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Chemistry topics

See the full AQA Chemistry curriculum →

How this lesson was checked. This AQA GCSE Chemistry (specification 8462)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 5 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students