Understanding exams
AQA GCSE Chemistry Paper 1 vs Paper 2: what's on each, and the 2027 dates
My daughter has just started Year 10, so "Chem P1" and "Chem P2" are now words on a planner in our kitchen. I am a carpenter, not a chemist. I assumed the two papers were the textbook cut in half. They nearly are. But AQA has one written rule about Paper 2 that changes how you should plan, and most revision checklists leave it out. Here is the plain version, parent to parent.
The one-sentence answer
AQA GCSE Chemistry is ten topics: Paper 1 is topics 1 to 5, Paper 2 is topics 6 to 10 plus the fundamental ideas from topics 1 to 3, each paper is 1 hour 45 minutes for 100 marks, and in 2027 they fall on 17 May and 15 June.
What is on AQA Chemistry Paper 1?
Paper 1 is the foundations: what matter is made of, how it bonds, how to count it, and what happens when it reacts.
- 1. Atomic structure and the periodic table — atoms, elements and compounds, electron arrangements, isotopes, the periodic table and the trends in groups 1, 7 and 0.
- 2. Bonding, structure and the properties of matter — ionic, covalent and metallic bonding, and why structure explains melting points and conductivity.
- 3. Quantitative chemistry — the calculations. Relative formula mass, balanced equations, moles at Higher tier, and for separate Chemistry, percentage yield and atom economy.
- 4. Chemical changes — the reactivity series, acids and making salts, and electrolysis.
- 5. Energy changes — exothermic and endothermic reactions and reaction profiles.
What is on AQA Chemistry Paper 2?
Paper 2 is chemistry in use: how fast reactions go, carbon chemistry, testing substances, the air and the planet's resources.
- 6. The rate and extent of chemical change — collision theory, what speeds a reaction up, reversible reactions and equilibrium.
- 7. Organic chemistry — crude oil, hydrocarbons and alkanes and cracking. Combined Science already covers cracking, alkenes and the bromine-water test. Separate Chemistry goes further into the structures and reactions of alkenes, alcohols, carboxylic acids and polymers.
- 8. Chemical analysis — pure substances, chromatography and gas tests. Separate Chemistry adds tests for ions and flame emission spectroscopy.
- 9. Chemistry of the atmosphere — how the early atmosphere formed, greenhouse gases, climate change and pollutants.
- 10. Using resources — drinking water, life cycle assessments and recycling. Separate Chemistry adds corrosion, alloys, the Haber process and fertilisers.
The catch: which Paper 1 topics can come back in Paper 2?
AQA's specification says that Paper 2 questions may draw on fundamental concepts and principles from sections 4.1 to 4.3. Those are topics 1, 2 and 3: atomic structure and the periodic table, bonding and structure, and quantitative chemistry.
It makes sense once you see it. You cannot explain why a hydrocarbon has a low boiling point without bonding. You cannot work out a rate or a yield without the calculations from topic 3.
Three details are worth knowing:
- The rule covers topics 1 to 3 only. Topics 4 and 5, chemical changes and energy changes, are not named.
- Two history sections are left out. AQA guidance for teachers says Paper 2 questions will not include the development of the model of the atom or the development of the periodic table.
- It runs one way. Paper 1 is sat first and examines topics 1 to 5.
So after Paper 1, your child should not bin the first three topics. Bonding and the mole calculations stay on the list until 15 June.
Which required practicals go with which Chemistry paper?
There is no separate practical exam. Practical questions sit inside the written papers, and each practical belongs to the paper that examines its topic.
Paper 1 practicals
- Making salts
- Neutralisation by titration — separate Chemistry only
- Electrolysis
- Temperature changes
Paper 2 practicals
- Rates of reaction
- Chromatography
- Identifying ions — separate Chemistry only
- Water purification
For each one, your child should be able to say what was changed, what was measured, what was kept the same, what could go wrong and what the results show.
When are the AQA GCSE Chemistry exams in 2027?
- Paper 1 (8462/1F and 1H): Monday 17 May 2027, morning.
- Paper 2 (8462/2F and 2H): Tuesday 15 June 2027, morning.
The Combined Science: Trilogy chemistry papers are on the same two mornings. These dates come from AQA's May/June 2027 timetable, version 1.2. Timetables are sometimes revised, so treat the personal timetable from school as final.
There are 29 days between the two papers. That is four clear weeks for topics 6 to 10, which is why a Paper 2 plan can start the afternoon Paper 1 finishes.
How long are the papers, and is there a formula sheet?
Separate GCSE Chemistry (8462): two papers, each 1 hour 45 minutes, each 100 marks and 50% of the grade.
Combined Science: Trilogy (8464): the same topic split, but each chemistry paper is 1 hour 15 minutes, 70 marks, and 16.7% of the double award.
Both are sat at Foundation or Higher tier. See Foundation vs Higher if the tier decision is still open.
One thing catches families out. The equation sheet that students now get is for physics equations. AQA's notice for 2027 covers Maths, Physics and Combined Science. There is no equivalent sheet of chemistry formulas, so the relationships in topic 3 have to be learned. I have written a separate guide to the physics equation sheet.
Separate Chemistry or Combined Science: check this first
Everything above uses the separate Chemistry course, code 8462. Combined Science: Trilogy students follow the same split with less content. Anything labelled "chemistry only" is not on their papers. Two of the eight practicals are chemistry only as well.
Ask your child or the school which course and tier they are entered for before you buy a revision guide. Combined vs Triple Science explains the difference.
How to use the split when planning revision
- Before 17 May, prioritise topics 1 to 5. Keep some regular practice on Paper 2 topics, including rates, organic chemistry and the atmosphere, rather than leaving them untouched until May.
- From 17 May to 15 June, revise topics 6 to 10. Use the four weeks. The revision timetable maker will lay them out.
- Keep topics 1 to 3 warm. One short session a week on bonding and on calculations is enough for the reach-back questions.
- Practise calculations with full working. Mark schemes give marks for method. GCSE mark schemes explained shows how that works.
- Read the first word of the question. "Describe" and "explain" are marked differently. GCSE command words covers each one.
Related guides
- AQA GCSE Biology Paper 1 vs Paper 2
- AQA GCSE Physics Paper 1 vs Paper 2: what's actually on each?
- Combined vs Triple Science
- How to answer 6-mark questions
Sources
- AQA, GCSE Chemistry (8462) specification at a glance — paper content and the Paper 2 rule for sections 4.1 to 4.3.
- AQA, Switching to AQA from Edexcel: GCSE Chemistry — the two sections not included in Paper 2 questions.
- AQA, Exam timetable May/June 2027, version 1.2 — exam dates.
- AQA, GCSE Chemistry required practical handbook — the eight practicals and which are chemistry only.
- AQA, Formulae and equation sheets for 2027 and 2028 onwards — which subjects get a sheet.
- AQA, Combined Science: Trilogy (8464) specification at a glance — Combined Science paper length and marks.
Checked against these sources on 11 November 2026.
I'm building Lightbulb Learning for my own daughter — revision that turns the day's actual class topic into a clear evening session, matched to her exam board and year. If that sounds useful for your child, your child's first three sessions are free if you'd like to try it.
Common questions
What topics are on AQA GCSE Chemistry Paper 1?
Paper 1 covers topics 1 to 5 of the AQA Chemistry course (8462): Atomic structure and the periodic table, Bonding, structure and the properties of matter, Quantitative chemistry, Chemical changes, and Energy changes.
What topics are on AQA GCSE Chemistry Paper 2?
Paper 2 covers topics 6 to 10: The rate and extent of chemical change, Organic chemistry, Chemical analysis, Chemistry of the atmosphere, and Using resources. AQA also states that Paper 2 questions may draw on fundamental ideas from topics 1 to 3.
Can Chemistry Paper 2 ask about Paper 1 topics?
Yes, within limits. AQA's specification says Paper 2 questions may draw on fundamental concepts and principles from the first three topics: atomic structure and the periodic table, bonding and structure, and quantitative chemistry. AQA guidance names two parts that will not appear in Paper 2 questions: the development of the model of the atom and the development of the periodic table. Topics 4 and 5 are not part of the rule.
When are the AQA GCSE Chemistry exams in 2027?
Paper 1 is on the morning of Monday 17 May 2027 and Paper 2 is on the morning of Tuesday 15 June 2027. The Combined Science: Trilogy chemistry papers are sat on the same two mornings. Dates are from AQA's May/June 2027 timetable, version 1.2. Your child's school will issue a personal timetable, and that is the one to follow.
How long is each AQA Chemistry paper and how many marks is it worth?
For separate GCSE Chemistry, each paper is 1 hour 45 minutes, worth 100 marks and 50% of the grade. For Combined Science: Trilogy, each chemistry paper is 1 hour 15 minutes, worth 70 marks and 16.7% of the double award.
Which required practicals are on each Chemistry paper?
Making salts, the titration, electrolysis and temperature changes belong to Paper 1. Rates of reaction, chromatography, identifying ions and water purification belong to Paper 2. The titration and identifying ions are for separate Chemistry only, so Combined Science students do six of the eight.
Is there an equation sheet for GCSE Chemistry?
No. The equation sheets required by Ofqual cover GCSE Maths, GCSE Physics and the physics equations in Combined Science. Chemistry relationships such as moles = mass ÷ relative formula mass still have to be learned.
Turn tonight’s topic into a real revision session.
Lightbulb builds notes, flashcards, a quiz and a marked exam question from whatever your child covered in class today — matched to their exam board. When full access opens, your first 3 sessions will be free.
Join the waitlist →Revise these AQA Chemistry topics free
- Alternative methods of extracting metals (HT)
- Atmospheric pollutants from fuels
- Atom economy
- Atoms, elements and compounds
- Calculating rates of reactions
- Carboxylic acids (chem only)
- Cells and batteries (chem only)
- Ceramics, polymers and composites (chem only)
- Chemical bonds (ionic, covalent, metallic)
- Collision theory and activation energy
- Concentration in mol/dm3 (chem HT)
- Conservation of mass and balanced equations
- Corrosion and its prevention (chem only)
- Covalent bonding
- Crude oil, hydrocarbons and alkanes
- Development of the model of the atom
- Development of the periodic table
- Diamond
- Earth's early atmosphere
- Effect of changing conditions on equilibrium (HT)
- Effect of pressure on equilibrium (HT)
- Effect of temperature on equilibrium (HT)
- Electrolysis of molten ionic compounds
- Electrolysis to extract aluminium
- Electronic structure
- Energy change calculations from bond energies (HT)
- Energy changes in reversible reactions
- Equilibrium
- Flame emission spectroscopy
- Formulations
- Giant covalent structures
- Global climate change
- Graphene and fullerenes
- Greenhouse gases
- Group 0 noble gases
- Group 1 alkali metals
- Group 7 halogens
- Half equations at electrodes (HT)
- Human activities and greenhouse gases
- Instrumental methods
- Ionic bonding
- Ionic compounds (giant ionic lattice)
- Life cycle assessment
- Mass changes when a reactant or product is a gas
- Metal hydroxide precipitate tests
- Metal oxides and oxidation
- Metallic bonding
- Metals as conductors
- Mixtures and separation techniques
- Neutralisation and salt production
- Oxidation and reduction in terms of electrons (HT)
- Percentage yield
- Potable water
- Properties and effects of atmospheric pollutants
- Properties of hydrocarbons and combustion
- Properties of ionic compounds
- Properties of metals and alloys
- Properties of polymers
- Properties of small molecules
- Proportions of gases in today's atmosphere
- Pure substances
- Reaction profiles
- Reactions of acids with metals
- Reduce, reuse, recycle
- Relative atomic mass
- Relative formula mass (Mr)
- Reversible reactions
- Size and mass of atoms; isotopes
- Sizes of particles and nanoparticles
- Soluble salts (Required practical 1)
- State symbols
- Strong and weak acids (HT)
- Structure and formulae of alkenes (chem only)
- Subatomic particles and atomic number
- Test for carbon dioxide
- Test for chlorine
- Test for hydrogen
- Test for oxygen
- Test for sulfates and Required practical 7
- The periodic table
- The process of electrolysis
- The reactivity series
- Three states of matter and particle theory
- Transition metals vs Group 1
- Uses and risks of nanoparticles
- Volumes of gases (chem HT)
- Waste water treatment