GCSE · Chemistry · AQA · Spec 8462

Soluble salts (Required practical 1)

You add far too much of one ingredient on purpose, then throw the extra away. That is not a mistake. It is the trick that makes a pure salt.

Making copper sulfate crystals, step by step

Tap each step for the reason behind it. Equipment washed with distilled water keeps the salt pure, which means free of unwanted substances.

Build the pattern

What else does an acid make?

Every one of these reactants makes a salt when it meets an acid. Tick the other products you expect for each one.

Metal oxide (copper oxide)
Metal hydroxide
Metal carbonate (calcium carbonate)
Metal (magnesium)

The equation behind the practical

Tap a molecule to see what it does in the reaction.

Be honest

The mixture just changed colour. Is the acid neutralised?

A student is adding copper oxide to warm sulfuric acid. After a few portions the mixture has clearly changed colour.

Which is closest to what you think right now?
How sure are you?

Crystallisation

?

Reason it through

Why do crystals of copper sulfate appear in the dish?

Link 1 of 4

First link · your turn

The filtrate sits in an evaporating dish over a water bath. What happens to the water?

2
Locked — reveal the link above first
3
Locked — reveal the link above first
4
Locked — reveal the link above first

Mark someone else's method

One line is going to cost this student their crystals

A student wrote out their method for making copper sulfate crystals. Exactly one line is wrong. Find it.

A student's method — which line goes wrong?

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

Add too much on purpose, filter it off, then let cooling do the rest.

What you need to know

  • Acid + metal oxide → salt + water. That's neutralisation, and it's how this practical makes a soluble salt.
  • The acid names the salt: hydrochloric gives a chloride, sulfuric a sulfate, nitric a nitrate. Copper oxide + sulfuric acid makes copper sulfate.
  • Have a goYour friend says sulfuric acid is the one to use if you want to make a chloride. Do you agree?

    No. Hydrochloric acid makes a chloride. Sulfuric acid makes a sulfate.

    The acid sets the ending of the salt's name, so the acid has to match the salt you want.

  • Hydroxides also give a salt and water. Carbonates give a salt, water and carbon dioxide (fizzing). Metals give a salt and hydrogen.
  • Have a goCalcium carbonate meets an acid and the beaker starts to fizz. Which gas is escaping?

    Carbon dioxide.

    Carbonates give carbon dioxide as well as the salt and water, and it shows up as bubbles.

  • The method is three jobs: neutralise the acid with the base, filter off the excess base, crystallise the salt.
  • Warm 25 cm³ of acid gently, then add the powdered oxide in small spatula portions, stirring each time.
  • Keep adding until some solid stays at the bottom. That excess base means all the acid has reacted.
  • Have a goYou stir in another spatula of copper oxide and it vanishes. Do you stop adding?

    No. Keep going until some solid stays at the bottom.

    Leftover solid shows the base is in excess, so the acid has fully reacted.

  • Check it's neutral with pH or universal indicator paper and the reference chart. A colour change on its own isn't proof.
  • Filter: insoluble copper oxide stays as residue, and the dissolved copper sulfate passes through as blue filtrate.
  • Heat the filtrate in an evaporating dish over a water bath, only until it's saturated. Never heat it to dryness.
  • Let the saturated solution cool so crystals form, then dry them. Slow drying in air gives larger crystals.
  • Have a goOne student leaves crystals to dry in the air and another puts theirs in a warm oven. Whose crystals end up larger?

    The ones dried slowly in the air.

    Drying slowly in the air gives larger crystals, while warmer temperatures give smaller ones.

The big picture

To make a soluble salt, you neutralise an acid with an insoluble base such as copper oxide, filter off the excess base, then crystallise the salt from the filtrate. Each step solves a specific problem: the excess base makes sure all the acid reacts, filtering removes the excess, and you heat only to a saturated solution so that cooling makes the crystals.

Key points

1Metal oxide + acid → salt + water, and the acid sets the salt's name: chloride, sulfate or nitrate.
2The method is three jobs in order: neutralise, filter, crystallise.
3The base is added in excess so all the acid reacts. The excess is insoluble, so filtering removes it.
4Heat the filtrate over a water bath only until it is saturated, then cool it so the salt crystallises.
5Equipment washed with distilled water avoids contamination, so the salt is pure.

Worked example

Problem

A student pours the whole reaction mixture into the filter paper at once, and some of it slops over the top of the paper into the conical flask. The filtrate now seems to contain base. What has gone wrong, and what can she do?

⚠ Watch out

Thinking you heat the salt solution until it is dry, or that a colour change shows the acid is neutralised. Heat over a water bath only until saturated, then cool it. Neutralisation is shown by solid left at the bottom plus a neutral pH or universal indicator paper reading.

🧠

Memory hook

Overdo it, filter it, stop short of dry, then let cooling do the work.

✓

Check yourself

Cover the page. Name the three jobs in order. Then say why the base is added in excess, and why you stop heating at a saturated solution.

Flashcards

(15)
What do a metal oxide and an acid make?
A salt and water: metal oxide + acid → salt + water.
Which salt does each acid make: hydrochloric, sulfuric, nitric?
Hydrochloric acid makes a chloride, sulfuric acid a sulfate, nitric acid a nitrate.
Write the symbol equation for copper oxide and sulfuric acid, with state symbols.
CuO(s) + H₂SO₄(aq) → CuSO₄(aq) + H₂O(l)
What does an acid make with a metal carbonate, and what do you see?
A salt, water and carbon dioxide gas, seen as bubbles (effervescence).
What do magnesium and hydrochloric acid make?
Magnesium chloride and hydrogen.
What are the three main steps for making a soluble salt from an insoluble base?
Neutralise the acid with the base, filter off the excess base, then crystallise the salt.
Why is the acid warmed gently at the start?
Gently heating the acid increases the rate of reaction.
Why is the base added until solid is left at the bottom?
Adding the base in excess makes sure all the acid reacts to form salt and water.
How do you check the solution is neutral?
Test it with pH or universal indicator paper and compare the colour with the reference chart.
What is filtration, and what are the residue and the filtrate here?
Filtration separates insoluble solids from a liquid using a filter. The residue is the excess copper oxide in the paper. The filtrate is the blue copper sulfate solution.
How is the filtrate heated to start crystallising?
Gently, in an evaporating dish over a water bath (a beaker of boiling water), until a saturated solution forms. Never to dryness.
What is a saturated solution?
One in which no more soluble salt can dissolve at a given temperature.
What is crystallisation, and why do crystals form on cooling?
It forms solid crystals from a saturated solution by evaporating the solvent. Solubility decreases as the temperature goes down, so the salt crystallises as the solution cools.
How can crystals be dried, and how does the method change their size?
In the air, in a warm oven, or by patting with filter paper. Slow air-drying gives larger crystals and warmer temperatures give smaller ones.
Why is equipment washed with distilled water?
To avoid contamination, which is the presence of unwanted substances in the salt.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Chemistry topics

See the full AQA Chemistry curriculum →

How this lesson was checked. This AQA GCSE Chemistry (specification 8462)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 13 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students