GCSE · Chemistry · AQA · Spec 8462
Test for sulfates and Required practical 7
A white cloud appears in a clear liquid. Is it real evidence of sulfate, or a false alarm?
Chemistry · Identifying ions
Walk the tests: what does each result tell you?
Start by adding dilute acid to the unknown solution. What do you see? Choose a branch, then keep going until you reach an ending.
Dilute acid → Barium chloride → Silver nitrate
4 possible results.
An unknown solution goes through the tests in order. At each step, pick what you see.
The acid rule
Reason it through
Why do we acidify with dilute hydrochloric acid, and never dilute sulfuric acid, for the sulfate test?
First link · your turn
The sample might contain impurities such as carbonate ions. What could they do to the sulfate test?
Two reactions, one solid
Problem
Magnesium sulfate solution and potassium sulfate solution are each tested with barium chloride solution. Which substance is the precipitate each time?
This planning task is the heart of AQA GCSE Chemistry required practical 7, identifying ions.
WHAT YOU'VE LEARNED
A quick recap of today's lesson.
What you need to know
- Before testing for carbonates, sulfates or halides, you usually add a dilute acid first, to avoid false positives.
- Sulfate test: add barium chloride solution to a sample acidified with dilute hydrochloric acid.
- A white precipitate of barium sulfate means sulfate ions are present. You may also see it spelt sulphate.
Have a goYour friend says: 'White precipitate with barium chloride? Chloride ions, obviously.' What has she mixed up?
The precipitate is barium sulfate, so it shows sulfate ions.
Barium chloride is just the reagent you add; the white solid that forms is barium sulfate, which points to sulfate.
- Use hydrochloric acid, never sulfuric: its chloride ions do not interfere, but sulfuric acid's sulfate ions would.
Have a goYou run out of hydrochloric acid and grab sulfuric acid instead. What could go wrong with the sulfate test?
It could give a false positive.
Sulfuric acid brings its own sulfate ions into the mixture, so the test could not tell them from the sample's.
- The dilute acid also reacts with and removes impurities, such as carbonate ions, that could cause false positives.
- In both example reactions, barium sulfate is the solid, so it is the precipitate.
- White precipitates can mean different ions: silver nitrate with dilute nitric acid gives white silver chloride, showing chloride ions.
Have a goTwo tubes each give a white precipitate. One had barium chloride added, the other silver nitrate. Same ion in both?
No: barium chloride's precipitate shows sulfate, silver nitrate's shows chloride.
The colour alone tells you nothing; the test that made the precipitate decides which ion it shows.
- Test in order: dilute acid for carbonates, then sulfates, then halides after acidifying. Metal cation tests are often last.
- Record every change: precipitate formation, colour changes and gas given off. A flow chart helps you plan the order.
The big picture
To test for sulfate ions, add barium chloride solution to a sample acidified with dilute hydrochloric acid. A white precipitate of barium sulfate shows sulfate ions. The acid removes impurities such as carbonate ions and must not add sulfate ions, which is why hydrochloric acid is used and sulfuric acid is not. Unknown samples are identified by testing in a sensible order: carbonates first, then sulfates, then halides after acidifying, with metal cation tests often last.
Key points
Worked example
Problem
Solution X gives no bubbles with dilute acid. A fresh sample of X is acidified with dilute hydrochloric acid and barium chloride solution is added. A white precipitate forms. What does this show, and what is the white solid?
⚠ Watch out
Saying a white precipitate with barium chloride shows chloride ions, or that any acid will do for the sulfate test. The precipitate is barium sulfate, so it shows sulfate ions. Use dilute hydrochloric acid, not sulfuric, because sulfuric acid adds sulfate ions itself.
Memory hook
Hunting for sulfate? The acid must come in clean: hydrochloric, never sulfuric. You can't catch the thief if you invite one in.
Check yourself
Without looking back: why is hydrochloric acid used before the sulfate test, and what would go wrong with sulfuric acid?
Flashcards
(11)What are the two ingredients of the sulfate test?
What shows a positive sulfate test?
Why add dilute acid before the sulfate test?
Why hydrochloric acid, not sulfuric acid, for the sulfate test?
What is a false positive?
Which acid is used in the halide test, and why?
What does a white precipitate with silver nitrate show?
In what order are unknown ions tested?
Why do the carbonate test before the sulfate test?
What should you record during ion tests?
Why use a flow chart for ion tests?
Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.
Learning with Lightbulb is opening soon
You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.
Keep me postedMore AQA GCSE Chemistry topics
How this lesson was checked. This AQA GCSE Chemistry (specification 8462)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 5 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.