GCSE · Maths · OCR · Spec J560

2D and 3D shapes terminology

Line. Edge. Vertex. You use these words all the time, but in maths each one has an exact job. Get them right and shapes get much easier to talk about.

Maths · Shape words

What's it called?

Tap a feature, then tap its name. If two names fit, pick the more specific one.

Which term names each feature?

Still to sort

Point (0)

An exact position, usually named with a capital letter like A or B.

Where the line is: A point has no size at all. The dot you draw is only there so you can see where it is.

Line (0)

Straight, and goes on without end in both directions.

Where the line is: A line has no endpoints. Give it two endpoints and you have a line segment instead.

Line segment (0)

The part of a line between two endpoints, named by them, like line segment AB.

Where the line is: It has two endpoints, so it has a definite length.

Vertex (0)

A point where two or more line segments or edges meet, such as a corner.

Where the line is: Every vertex is a point, but it is called a vertex when line segments or edges meet there.

Edge (0)

Where two faces of a 3D solid meet.

Where the line is: On a cube every edge is a line segment. On a solid with a curved surface an edge can be curved.

Plane (0)

A flat surface that goes on without end in every direction.

Where the line is: A 2D shape lies in a plane, and so does each flat face of a solid.

Parallel lines (0)

Lines in the same plane that never meet, however far they are extended.

Where the line is: They stay the same perpendicular distance apart. Matching arrowheads mark them on a diagram.

Perpendicular lines (0)

Lines that meet, or cross, at a right angle of 90°.

Where the line is: A small square drawn where the lines meet marks the right angle.

8 of 8 still to sort.

Maths · Line or line segment?

Maya's measurement

Maya marks two points, A and B, on a flat page. She joins them with a ruler and a straight pencil mark, measures 8 cm, and says: 'That's line AB, and it's 8 cm long.'

Which idea is closest to what you think right now?
How sure are you?

Predict, then check

Picture a solid cube in your hand, not a drawing of one.

How many edges and how many vertices does a cube have?

Maths · Segment or edge?

Two names, one feature?

For each feature, tick every set it belongs to, or 'In none'.

  • A Line segment
  • B Edge of a solid
  1. One of the 12 edges of a cube
  2. A diagonal across one flat face of a cube, from corner to corner
  3. The circular rim where a cylinder's flat end meets its curved surface
  4. A straight line that goes on without end in both directions
  5. One corner of a cube, where its edges meet
  6. The straight piece between points M and N drawn on a flat page

Maths · Parallel lines

Make the lines lean
10.0 units10.0 unitsPQRS

Left gap 10.0 units. Right gap 10.0 units. Relationship: Equal gaps at both ends: the lines are parallel. Unequal gaps: the lines are not parallel, so they meet, or would meet if extended far enough.

Left gap10.0 unitsRight gap10.0 unitsDrag S up or down, then bring it back until the gaps match.

Equal gaps at both ends: the lines are parallel. Unequal gaps: the lines are not parallel, so they meet, or would meet if extended far enough.

Each line here is drawn as a piece. A real line goes on without end in both directions. The two faint pieces are the gaps, measured straight across at right angles to the top line.

Maths · Try it yourself

Describe the diagram

A diagram shows a four-sided shape with corners labelled S, T, U and V. Sides ST and VU each carry a matching arrowhead. A small square is drawn at T, between sides ST and TU.

Describe the features of this diagram, using the terms vertex, line segment, parallel and perpendicular correctly. [4 marks]

0 words · your answer stays on this page and is not sent anywhere.

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

Eight words with exact jobs, and two little marks that say a lot.

What you need to know

  • A point marks an exact position and has no size. We usually name points with capital letters, like A or B.
  • A line is straight and goes on without end in both directions.
  • Have a goZoe proudly shows you the line she drew across her page. Did she draw a whole line?

    No. She drew only a piece of one.

    A line goes on without end in both directions, so no drawing can show all of it.

  • A line segment is the part of a line between two endpoints, named by them: line segment AB. It has a definite length.
  • A vertex (plural vertices) is a point where two or more line segments or edges meet, like a corner.
  • Have a goA friend taps the corner of a cube and says, 'That's a point.' Is your friend wrong?

    Not wrong, but 'vertex' is the better name.

    A vertex is a point where edges meet, so calling it a vertex tells you more than calling it a point.

  • An edge is where two faces of a 3D solid meet. A cube has 12 edges, each a line segment, and 8 vertices.
  • On a solid with a curved surface an edge can be curved, like the circular edge where a cylinder's flat end meets its curved surface.
  • A plane is a flat surface that goes on without end in every direction.
  • A 2D shape lies in a plane, and so does each flat face of a solid.
  • Have a goThe flat top of a cube lies in a plane. Does that plane stop at the top's edges?

    No. It goes on without end in every direction.

    Only the face stops at its edges. The plane it lies in carries on in every direction.

  • Parallel lines lie in the same plane and never meet, however far they go. Matching arrowheads mark them on a diagram.
  • Perpendicular lines meet, or cross, at a right angle of 90°. A small square marks it where they meet.

The big picture

Eight terms name the features of shapes: point, line, line segment, vertex, edge, plane, parallel lines and perpendicular lines. A point has no size, a line never ends, a line segment has two endpoints and a definite length, and vertices and edges are where segments or faces meet. A plane is flat and endless, parallel lines never meet, and perpendicular lines meet at 90°.

Key points

1A line goes on without end. Only a line segment, named by its two endpoints, has a definite length.
2A vertex is a point where line segments or edges meet. An edge is where two faces of a solid meet.
3A cube has 12 edges and 8 vertices, and each cube edge is a line segment. A cylinder's circular edge is curved.
4A plane is flat and goes on without end in every direction. 2D shapes and each flat face of a solid lie in planes.
5Parallel lines never meet and stay the same perpendicular distance apart, marked with arrowheads. Perpendicular lines meet at 90°, marked with a small square.

Worked example

Problem

Points A, B and C lie in a row on a straight line, with B between A and C. Name every line segment that has two of these points as its endpoints.

⚠ Watch out

Calling the straight mark between A and B 'line AB' and giving it a length. A line goes on without end, so it has no definite length. The piece between the endpoints A and B is line segment AB, and that is what you measure.

🧠

Memory hook

Line: no ends. Line segment: two ends. Point: no size.

✓

Check yourself

How does a line differ from a line segment, and a vertex from an edge? (No ends versus two endpoints. A point where edges meet versus where two faces meet.)

Flashcards

(12)
What does a point mark, and how big is it?
An exact position. It has no size. Points are usually labelled with capital letters, like A or B.
What is a line?
A line is straight and extends without end in both directions.
What is a line segment, and how is it named?
The part of a line between two endpoints, so it has a definite length. It is named by its endpoints, for example line segment AB.
What is a vertex? What is the plural?
A point where two or more line segments or edges meet, such as a corner of a polygon or a solid. The plural is vertices.
What is an edge of a 3D solid?
Where two faces of the solid meet.
Is every edge a line segment?
No. On a solid such as a cube every edge is a line segment, but on a solid with a curved surface an edge can be curved, like the circular edge where a cylinder's flat end meets its curved surface.
How many edges and vertices does a cube have?
12 edges and 8 vertices.
What is a plane?
A flat surface that extends without end in every direction. A 2D shape lies in a plane, and each flat face of a solid lies in a plane.
What are parallel lines?
Lines in the same plane that never meet, however far they are extended. They stay the same perpendicular distance apart and point in the same direction.
How are parallel lines marked on a diagram?
With matching arrowheads on the lines.
What are perpendicular lines?
Lines that meet, or cross, at a right angle, 90°.
How is a right angle between perpendicular lines marked?
With a small square at the point where they meet.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More OCR GCSE Maths topics

See the full OCR Maths curriculum →

How this lesson was checked. This OCR GCSE Maths (specification J560)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 18 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students