GCSE · Physics · AQA · Spec 8463

Induced potential / generator effect (physics only, HT only)

A coil in a complete circuit, no battery anywhere. Push a magnet in and a current flows. Hold it still and the current stops. Why?

Higher

Physics only · Going further · Induced potential

Move the magnet. Watch the coil.

NScoilmoving in

Electromagnetic induction — Magnet moving in. motion right. current out. The magnet is moving into the coil, so a current is induced in the coil.. static

try 'held still' on purpose

The magnet is moving into the coil, so a current is induced in the coil.

The coil is part of a complete circuit. Pick what the magnet does and see whether a current is induced. The dot and the cross at the top of the coil show the induced current coming out of the page or going into it: opposite symbols mean opposite directions.

Watch out: Being close to the coil is not enough. In a steady magnetic field, a current is induced only while the magnet or the wire is moving.
Higher

Going further (physics only): motor effect or generator effect?

Motor effectvsGenerator effect

Same wire, same magnetic field. What changes is what you put in.

Focus

What you do to the wire

Motor effect

Put a current through it, while it sits in a magnetic field

Generator effect

Move it through the magnetic field

The insight

The two effects swap input and output: one starts with a current, the other starts with movement.

What you get

Motor effect

The wire moves

Generator effect

A current appears in the wire

What has to be there

Motor effect

A magnetic field, a wire, and a current in the wire

Generator effect

A magnetic field, a wire, and movement of the wire through the field

Higher

Physics only · Going further · Proportion

Twice the speed, twice the potential
0 mV5 mV10 mV15 mV20 mVdrag the speed

Speed of the magnet: 1/4. Speed of the magnet 10 cm/s. Induced potential 5 mV

Speed of the magnet10 cm/sInduced potential5 mV

Example numbers. Drag the speed of the magnet and watch the induced potential keep pace. The same pattern holds if you change the field strength or the number of turns instead, one change at a time.

Watch out: Proportional means the same multiplier on both sides. Twice the speed gives exactly twice the potential, not just a bit more.
Higher

Going further (physics only): predict, then check

Same magnet, same movement every time. Only what is connected to the coil changes.

A magnet is moved steadily into a coil. Set-up 1: the coil is not connected to anything. Set-up 2: the coil is connected to one bulb. Set-up 3: the coil is connected to two bulbs. Which statement is correct?

Higher

Going further (physics only): work and the induced current

?

Reason it through

Why does it take effort to push a magnet into a coil that is part of a complete circuit?

Link 1 of 4

First link · your turn

You push the magnet into the coil. What does that movement do?

2
Locked — reveal the link above first
3
Locked — reveal the link above first
4
Locked — reveal the link above first

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

Push a magnet into a coil and a current can appear. Hold it still and it disappears. Here is how to predict it, and how to make it bigger.

What you need to know

  • The generator effect: moving a wire and a magnet relative to each other can induce a current in a complete circuit.
  • In a magnetic field, a current makes a wire move (motor effect). Moving the wire makes a current appear (generator effect).
  • Have a goFill the gap: in the generator effect, ____ goes in and ____ comes out. Which way round is the motor effect?

    Movement in, current out. The motor effect is the other way round.

    The generator effect starts with you moving the wire and ends with a current. The motor effect starts with a current and ends with movement.

  • In a steady magnetic field, a current is induced only while the wire or magnet is moving. No movement, no induced current.
  • Reverse the movement and the induced current reverses. Push a magnet into a coil, then pull it out: opposite currents.
  • Have a goMaya pushes a magnet into a coil and the meter needle kicks right. She swears that pulling it out will kick it right again. Is she right?

    No. The needle kicks the other way.

    Reversing the movement reverses the induced current. Maya assumed an induced current keeps one direction whatever the magnet does.

  • A faster movement or a stronger magnet induces a greater current.
  • Have a goSame coil, same speed, but you swap a weak magnet for a much stronger one. Is the induced current greater, smaller or the same?

    Greater.

    A stronger magnet induces a greater current. The movement did not change, so the stronger magnet is what made the difference.

  • A moving magnet can induce a potential difference across a coil, even unconnected: one end positive, one negative, like a battery.
  • Double the field strength, the speed or the turns (one at a time) and the induced potential doubles.
  • What is connected does not change the induced potential, but the current depends on the circuit's resistance. A second bulb gives a smaller current.
  • Push a magnet into a coil in a circuit and the induced current turns the coil into an electromagnet that pushes back.
  • So work has to be done to push the magnet in, and that energy goes into the current.

The big picture

Moving a wire and a magnet relative to each other induces a potential difference, and a current if the circuit is complete. In a steady field this happens only while they move, and reversing the movement reverses the current. A faster movement or a stronger magnet gives a greater current, and the induced potential is proportional to the field strength, the speed and the number of turns. It is the mirror image of the motor effect, and pushing the magnet in takes work.

Key points

1In a steady magnetic field, a current is induced only while the wire or magnet is moving relative to the other.
2Reversing the movement reverses the induced current.
3A faster movement or a stronger magnet gives a greater induced current. The induced potential is proportional to the field strength, the speed and the number of turns.
4The induced potential depends on the coil, the magnet and how it moves. The current also depends on the circuit, so a second bulb gives a smaller current.
5The motor effect turns a current into movement; the generator effect turns movement into a current.
6Pushing a magnet into a coil in a circuit takes work, because the induced current makes the coil push back. That energy goes into the current.

Worked example

Problem

Going further (physics only): A magnet is pushed into a coil at a steady speed. The coil is not connected to anything, but a voltmeter across its ends reads an induced potential of 4 mV (an example number). Predict the reading if (a) the magnet is pushed in twice as fast, and (b) the original speed is used but the coil is swapped for one with three times as many turns.

⚠ Watch out

Thinking a magnet near a wire always makes a current, or that only the magnet sets its size. In a steady field a current is induced only while something moves, and the circuit matters too: a second bulb gives a smaller current.

🧠

Memory hook

Stop moving, stop the current. Flip the movement, flip the current.

✓

Check yourself

Without looking back: a magnet is sitting still beside a coil in a complete circuit. What must you do to get a current, how could you make it greater, and how could you reverse it?

Flashcards

(11)
Going further (physics only): What is the generator effect?
Inducing a current by the relative movement of a wire (a circuit) and a magnetic field. A magnet moving relative to a wire in a complete circuit can make a current flow.
Going further (physics only): Motor effect or generator effect: which starts with a current and which with movement?
Motor effect: a current in a wire in a magnetic field makes the wire move. Generator effect: moving the wire in the field makes a current appear.
Going further (physics only): In a steady magnetic field, when is a current induced?
Only while the wire or magnet is moving. A wire that is not moving in a steady field has no induced current.
Going further (physics only): What happens to the induced current if the magnet is pulled out instead of pushed in?
It flows in the opposite direction. Reversing the movement reverses the induced current.
Going further (physics only): Which two changes induce a greater current?
A faster relative movement, or a stronger magnet.
Going further (physics only): What is the induced potential across a coil that is not connected to anything?
A potential difference across the ends of the coil, caused by a moving magnet. One end is positive and the other negative.
Going further (physics only): What is the induced potential proportional to?
The field strength, the speed of the movement and (for a magnet moving relative to a coil) the number of turns. Doubling any one doubles it.
Going further (physics only): Does connecting a bulb change the induced potential across a coil?
No. It depends on the coil, the magnet and how the magnet moves, not on what is connected to it.
Going further (physics only): What else decides the size of the induced current round a circuit?
The induced potential and the resistance of the circuit. Adding a second bulb gives a smaller current.
Going further (physics only): While a magnet moves through a coil in a circuit, what does the coil act like?
A battery that pushes current round the circuit, but only while the magnet is moving.
Going further (physics only): Why does it take work to push a magnet into a coil in a circuit?
The induced current turns the coil into an electromagnet that pushes back on the magnet. The energy you transfer goes into the current.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Physics topics

See the full AQA Physics curriculum →

How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 5 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students