GCSE · Physics · AQA · Spec 8463

Loudspeakers and headphones (physics only, HT only)

Rest a fingertip on a speaker cone while music plays and you'll feel it buzzing. Nothing in there is spinning. So what's shoving it back and forth?

Follow the current

1Current flows one way23456

Stage 1 of 6: Current flows one way. paused

Current flows one way · 1/6drag to follow the current →

The signal is an alternating current. Right now it flows one way round the coil, and the coil becomes an electromagnet.

Drag through one back-and-forth of the signal and watch what the coil and cone do.

Inside a loudspeaker

The parts of a moving-coil loudspeaker
side view, cut in halfairsignal in (a.c.)magnetconecoil

View: Whole speaker. Showing 3 layers: Frame, Fixed part, Moving parts

View

Layers

Explore

Tap a part, then switch views to see what moves and what doesn't.

A cone joined to a coil of wire, sitting in the field of a permanent magnet.

Tap each part to find out its job. Then switch views: what moves, and what stays still?

Reading the signal

What sets the pitch, and what sets the loudness
timep.d. across the coil+−

View: Reverse it more often. Showing 3 layers: Axes, Original (for comparison), Reverses more often

View

Layers

Explore

Switch views and compare each new trace with the dashed original.

Same height, but the crossings are squeezed closer together: the p.d. reverses more times per second. The cone changes direction more quickly, so the frequency is higher and you hear a higher pitch. The loudness hasn't changed.

The sound is carried by an electrical signal that changes over time to match the sound wave. Change it one way at a time.

What do you think?

Four claims about loudspeakers

A friend is explaining how a loudspeaker works and makes four claims.

Pick the claim you think is right, then say how sure you are.
How sure are you?

Now run it backwards

Moving-coil loudspeakervsMoving-coil microphone

Same coil-and-magnet idea, opposite job.

Focus

Which effect it uses

Moving-coil loudspeaker

The motor effect: a current in the coil, in the magnet's field, makes a force on the coil.

Moving-coil microphone

The generator effect: moving the coil through the magnet's field induces a p.d. across it, which pushes a current round the circuit.

The insight

Same parts, opposite cause and effect. Current causes movement in the speaker; movement causes a current in the microphone.

What it converts

Moving-coil loudspeaker

An electrical signal into sound waves

Moving-coil microphone

Sound waves into an electrical signal

What gets the coil moving

Moving-coil loudspeaker

The alternating current in the coil causes the force that moves the coil and cone.

Moving-coil microphone

The sound wave makes the diaphragm vibrate, and the diaphragm moves the coil.

The surface that meets the air

Moving-coil loudspeaker

A cone joined to the coil, moving in relation to a fixed permanent magnet

Moving-coil microphone

A diaphragm joined to the coil, moving in relation to a fixed magnet

Changing direction

Moving-coil loudspeaker

Each time the current reverses, the force reverses and the cone moves back.

Moving-coil microphone

Each time the diaphragm changes direction, the induced current changes direction.

Bigger in, bigger out

Moving-coil loudspeaker

A larger p.d. gives a larger force, bigger vibrations and a louder sound.

Moving-coil microphone

The further the diaphragm is pushed in or out, the larger the induced p.d.

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

How a loudspeaker turns an electrical signal into sound, and a microphone turns it back

What you need to know

  • In a moving-coil loudspeaker, a cone is joined to a coil of insulated wire. They move; the permanent magnet stays fixed.
  • The motor effect: a current-carrying conductor in a magnetic field feels a force. A loudspeaker uses it to turn electrical signals into sound.
  • The coil carries the input signal, an alternating current. That makes it an electromagnet, so there's a force between it and the magnet.
  • Current one way moves coil and cone one way; reversed, they move back. Doing this in time with the signal vibrates the air: sound!
  • Have a goBe the cone! Hold your hand up flat. The current flows one way, then flips, then flips back again. What does your hand do?

    It moves one way, then back the other way, then the first way again: it vibrates back and forth.

    Every time the current reverses, the force on the coil reverses, so the coil and cone change direction with it.

  • A sound can be an electrical signal changing over time to match the wave. Louder: bigger amplitude. Higher pitch: higher frequency.
  • Reverse the p.d. more times per second and the cone changes direction more quickly: higher frequency, higher pitch.
  • Have a goYour signal starts reversing faster, but the p.d. stays the same size. Which changes: the pitch or the loudness?

    The pitch goes up. The loudness stays the same.

    How often the p.d. reverses sets the pitch. The size of the p.d. hasn't changed, so the force and the loudness haven't either.

  • Bigger p.d., bigger force, so the cone moves further. Bigger vibrations mean a louder sound.
  • Have a goTurn it up! You make the p.d. bigger but keep it reversing just as often. Predict what the cone does and what you hear.

    The cone moves further each way. The sound is louder, at the same pitch.

    A bigger p.d. gives a bigger force, so bigger vibrations. Only changing how often it reverses would change the pitch.

  • A moving-coil microphone does the opposite: sound in, signal out. Moving a circuit relative to a magnetic field induces a p.d.: the generator effect.
  • Sound vibrates the diaphragm, moving its attached coil through the fixed magnet's field. The induced p.d. pushes a current round the circuit.
  • The current flips whenever the diaphragm changes direction, and a bigger push gives a bigger p.d. So the signal matches the sound wave.

The big picture

A moving-coil loudspeaker turns an electrical signal into sound using the motor effect. The signal is an alternating current in a coil joined to a cone; each time the current reverses, the force on the coil reverses, so the coil and cone vibrate in time with the signal and make the air vibrate. How often the p.d. reverses sets the pitch, and how big it is sets the loudness. A moving-coil microphone does the opposite job, turning sound into an electrical signal with the generator effect.

Key points

1Loudspeaker: electrical signal → sound, using the motor effect.
2The coil and cone move; the permanent magnet stays fixed.
3Current reverses → force reverses → cone moves back, so the cone vibrates in time with the signal.
4How often the p.d. reverses sets the pitch; how big the p.d. is sets the loudness.
5Microphone: sound → electrical signal, using the generator effect. The induced p.d. matches the sound wave.

Worked example

Problem

The signal to a loudspeaker is changed so that the p.d. reverses twice as often as before, but is only half as big. Describe how the movement of the cone changes, and what happens to the sound.

⚠ Watch out

Saying a bigger p.d. makes the sound higher-pitched. A bigger p.d. makes the cone move further, so the sound is louder. Only reversing the p.d. more times per second raises the pitch.

🧠

Memory hook

Speaker: current makes motion, the MOTOR effect. Microphone: motion makes current, the GENERATOR effect. Same coil and magnet, run in opposite directions.

✓

Check yourself

Cover the page and explain, in four or five linked steps, why a loudspeaker cone moves back in as well as out. Use the words current, coil, force and magnet.

Flashcards

(14)
What are the main parts of a moving-coil loudspeaker?
A cone, a coil of insulated wire joined to the cone, and a fixed permanent magnet. The coil is connected to the input signal.
In a loudspeaker, which parts move and which part stays still?
The coil and cone move together. The permanent magnet is fixed.
What is the motor effect, and what does a loudspeaker use it for?
A conductor carrying a current in a magnetic field experiences a force. The loudspeaker uses it to turn electrical signals into sound.
What kind of current is the input signal to a loudspeaker?
An alternating current: it keeps changing direction.
Why is there a force on the coil when current flows through it?
The coil becomes an electromagnet, so there is a force between it and the permanent magnet.
The current in a loudspeaker's coil flips direction. What does the cone do next?
It heads back the other way: flipping the current flips the force, and the cone is carried with the coil.
How does the moving cone produce a sound?
It moves backwards and forwards in time with the signal, making the air vibrate, which produces a sound wave.
What change to the signal gives a higher-pitched sound?
Reversing the p.d. more times per second. The cone changes direction more quickly, giving a higher frequency and so a higher pitch.
What change to the signal gives a louder sound?
A larger p.d. It gives a larger force, so the cone moves further and the vibrations (the amplitude) are bigger.
On a trace of a sound signal, what does the horizontal axis show?
Time. The signal changes over time to match the sound wave.
What does a moving-coil microphone convert, and which effect does it use?
Sound waves into electrical signals, using the generator effect.
What is the generator effect?
A potential difference (and so a current) is induced when a circuit and a magnetic field move relative to each other.
How does sound produce a signal in a moving-coil microphone?
The sound makes the diaphragm vibrate. This moves the coil through the magnet's field, inducing a p.d. that pushes a current round the circuit.
Why does a microphone's signal match the sound wave that made it?
The induced current changes direction each time the diaphragm changes direction, and the further the diaphragm is pushed, the bigger the induced p.d.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Physics topics

See the full AQA Physics curriculum →

How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 2 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students