GCSE · Physics · AQA · Spec 8463

Microphones (physics only, HT only)

You sing into a microphone and your voice fills the hall. In between, something travels down a wire. It is not your voice. So what is it?

Higher

From sound wave to signal

1Sound hits the diaphragm2345

Stage 1 of 5: Sound hits the diaphragm. paused

Sound hits the diaphragm · 1/5scrub along the chain

A sound wave is vibrating air particles. They hit the diaphragm, the cone at the front of the microphone.

Drag the dot along the chain, or press play and watch the order.

Higher

Inside a moving-coil microphone

Three parts, one job
sound wavediaphragm (cone)to the circuitcoil of wirefixedpermanent magnet

View: Add the magnet. Showing 4 layers: Sound wave, Diaphragm (cone), Coil of wire, Permanent magnet

View

Layers

Explore

Tap a part to light it up, or build the microphone one part at a time.

The coil moves in relation to a fixed permanent magnet. That is the whole microphone.

A simple sketch, not to scale. Build it part by part, then tap a part to find out what it does.

Higher

Turn the sound up

02468-4-2024timepotential difference
Loudness setting 1

Loudness setting: 1

Setting 1 is a quiet sound, setting 3 a loud one. The numbers on the axes are an illustrative scale, not real volts.

Higher

Raise the pitch

02468-4-2024timepotential difference
Pitch setting 1

Pitch setting: 1

Setting 1 is a low note, setting 3 a high one. Count the complete waves between 0 and 8.

Higher

Microphone to loudspeaker

?

Reason it through

Why does a microphone's signal need boosting before a loudspeaker can use it?

Link 1 of 4

First link · your turn

Compare the potential difference a microphone produces with the signal a loudspeaker needs to move its cone. Which is far bigger?

2
Locked — reveal the link above first
3
Locked — reveal the link above first
4
Locked — reveal the link above first
Higher

Same parts, opposite jobs

MicrophonevsMoving-coil loudspeaker

A loudspeaker is a microphone run backwards. Work out the difference for each row, then reveal.

Focus

Effect it uses

Microphone

The generator effect

Moving-coil loudspeaker

The motor effect

The insight

One device turns movement into a potential difference. The other turns an electrical signal into movement that makes sound.

What goes in

Microphone

A sound wave

Moving-coil loudspeaker

An electrical signal

What comes out

Microphone

An electrical signal

Moving-coil loudspeaker

A sound wave

What moves the coil

Microphone

The vibrating diaphragm

Moving-coil loudspeaker

The alternating current changing direction

The coil-and-magnet arrangement

Microphone

Diaphragm (a cone) connected to a coil that moves in relation to a fixed permanent magnet

Moving-coil loudspeaker

Coil attached to a cone that moves in relation to a fixed magnet

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

Sound pushes a coil through a magnetic field, and the current that results copies the sound's pattern.

What you need to know

  • A microphone converts a sound wave into an electrical signal, an electronic copy of the sound wave.
  • The generator effect: when a conductor moves in a magnetic field, a potential difference is induced across it.
  • A moving-coil microphone: a diaphragm (a cone) connected to a coil that moves in relation to a fixed permanent magnet.
  • Have a goYour mate swears the permanent magnet is the part that wobbles when you talk into a moving-coil microphone. Is your mate right?

    No. The magnet is fixed; the diaphragm and its coil move.

    The coil is connected to the diaphragm, and it is the coil that moves in relation to the fixed permanent magnet.

  • Vibrating air particles make the diaphragm vibrate backwards and forwards, moving the coil back and forth through the magnetic field.
  • The coil's movement induces a potential difference that pushes a current around the circuit; both reverse each time the diaphragm changes direction.
  • Have a goThe diaphragm moves in, then out, then in again. How many times does the current change direction?

    Twice.

    The current reverses each time the diaphragm changes direction: once from in to out, and once from out to in.

  • A louder sound moves the diaphragm further, giving a bigger induced potential difference and current: a larger amplitude.
  • Have a goA whisper and a shout reach the same microphone. Which one pushes the diaphragm further, and which signal has the larger amplitude?

    The shout does both.

    A louder sound makes the diaphragm move further, which induces a greater potential difference and gives a larger amplitude.

  • Higher pitch means higher frequency: the diaphragm vibrates more times per second, and the signal has the same frequency as the sound.
  • Have a goA singer glides up to a higher note. What happens to the number of times the coil vibrates each second?

    It goes up.

    A higher pitched sound has a higher frequency, so the diaphragm and coil vibrate more times per second.

  • An oscilloscope can display the signal, with potential difference up the side and time along the bottom.
  • The microphone's potential difference is much smaller than a loudspeaker needs, so an amplifier increases it without changing its shape.
  • A moving-coil loudspeaker works the opposite way: it uses the motor effect to turn an electrical signal into a sound wave.

The big picture

A moving-coil microphone is a tiny generator. A sound wave makes its diaphragm, a cone, vibrate backwards and forwards, which moves a connected coil through the magnetic field of a fixed permanent magnet. The generator effect induces a potential difference across the coil, pushing a current that reverses with each change of direction. Louder sound gives a larger amplitude and higher pitch a higher frequency, so the signal matches the sound wave. The signal is too small for a loudspeaker, so an amplifier increases it without changing its shape. A loudspeaker works the opposite way, using the motor effect.

Key points

1A microphone converts a sound wave into an electrical signal using the generator effect.
2Sound makes the diaphragm vibrate, which moves the connected coil through the field of the fixed permanent magnet and induces a potential difference and current that reverse each time the diaphragm changes direction.
3Louder sound gives a larger amplitude. Higher pitch gives a higher frequency, so more complete vibrations in the same time. The signal matches the sound wave.
4The microphone's potential difference is much smaller than a loudspeaker needs, so an amplifier increases it without changing its shape.
5A moving-coil loudspeaker works in the opposite way, using the motor effect to convert an electrical signal into a sound wave.

Worked example

Problem

An oscilloscope shows two signals from the same microphone over the same length of time. Trace P has peaks 2 cm high and 2 complete waves. Trace Q has peaks 1 cm high and 4 complete waves. Compare the two sounds.

⚠ Watch out

Thinking the signal in the wire is the sound itself, or big enough to drive a loudspeaker. It is an electrical copy of the sound wave, and its potential difference is much smaller than a loudspeaker needs, so an amplifier increases it first.

🧠

Memory hook

Microphone: sound in, signal out, generator effect. Loudspeaker: the same device run backwards, with the motor effect.

✓

Check yourself

Cover the page. Follow one push of sound from diaphragm to current, then say what a louder sound and a higher pitched sound each do to the trace.

Flashcards

(11)
What does a microphone convert a sound wave into?
An electrical signal, which is an electronic copy of the sound wave.
What is the generator effect?
Inducing a potential difference, and so a current, by the relative movement of a conductor or circuit and a magnetic field. When a conductor moves in a magnetic field, a potential difference is induced across it.
What is a moving-coil microphone made from?
A diaphragm (a cone) connected to a coil of wire that moves in relation to a fixed permanent magnet.
What does a sound wave do to the diaphragm?
The vibrating air particles make it vibrate backwards and forwards, moving the coil back and forth through the magnetic field of the magnet.
What does the coil's movement through the magnetic field do?
It induces a potential difference across the coil, which pushes a current around the circuit.
What happens to the induced potential difference and current when the diaphragm changes direction?
They change direction too, each time the diaphragm does.
What does a louder sound do to the diaphragm and the signal?
The diaphragm moves further, so the induced potential difference and the current are greater, and the signal has a larger amplitude.
What does a higher pitched sound do to the signal?
The diaphragm and coil vibrate at a higher frequency, and the induced signal has the same frequency as the sound, so it matches the pattern of the sound wave.
What does an oscilloscope show on its two axes?
Potential difference up the side and time along the bottom. A larger amplitude means a louder sound; more complete vibrations in the same time means a higher pitch.
Why is an amplifier used between a microphone and a loudspeaker?
The microphone's potential difference is much smaller than the signal needed to move the cone of a loudspeaker. The amplifier increases it without changing the shape of the signal.
How does a moving-coil loudspeaker differ from a microphone?
It works in the opposite way: it uses the motor effect to convert an electrical signal into a sound wave, with a coil attached to a cone that moves in relation to a fixed magnet as the alternating current changes direction.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Physics topics

See the full AQA Physics curriculum →

How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 13 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students