GCSE · Physics · AQA · Spec 8463

Specific heat capacity (ΔE = m c Δθ)

Give 1 kg of water and 1 kg of lead exactly the same amount of energy. One barely warms and the other shoots up. Which is which, and why?

Same energy in. Very different warming.

01200240036004800010203040Energy supplied to 1 kg (J)Temperature rise (°C)1.0 °CTemperature rise at 4200 Jlift the point ↑
Material number 1

Material number: 1. Temperature rise at 4200 J: 1.0 °C

Each line is 1 kg of one material being heated, and its steepness is how much it warms for each joule. Material 1 is water (c = 4200 J/kg °C), 2 is glass (840), 3 is iron (450) and 4 is lead (130). Lift the point to swap material.

Physics · Temperature or energy?

Is hotter the same as more energy?

A mug of water and a full bath of water are at exactly the same temperature.

Which of these is closest to what you think right now?
How sure are you?

Physics · Mass and energy

Heat the water by the same 5 °C. What does extra water cost?
0 kg1 kg2 kg3 kg4 kgdrag the mass →

mass of water: 1/4. Mass of water 1 kg. Energy needed 21,000 J. Time, compared with 1 kg ×1

Mass of water1 kgEnergy needed21,000 JTime, compared with 1 kg×1

Every bar is water heated by the same 5 °C with the same kettle. Drag the bar to change the mass and watch the energy and the time.

Your turn: calculate it

A 2 kg block of iron (c = 450 J/kg °C) is heated from 20 °C to 70 °C. Find the energy transferred. The answer appears once all three boxes are filled in.

Finding thermal energy (J)

ΔE = m c Δθ

Fill in the values above to solve for thermal energy.

Physics · Finding an unknown

Work backwards to find c

A 0.4 kg block is heated and its temperature rises by 25 °C. The energy transferred to it is 1300 J. Find the specific heat capacity of the block.

  1. Write out the equation: ΔE = m c Δθ
  2. Substitute what you know: 1300 = 0.4 × c × 25
  3. missing step
Which line is step 3?

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

How much energy does it take to warm something up, and why do some materials put up more of a fight than others?

What you need to know

  • Specific heat capacity measures how hard it is to change the temperature of 1 kg of a material by 1 °C.
  • It is called c and measured in J/kg °C. Water is 4200, glass 840, iron 450 and lead 130.
  • A large c means a lot of energy to warm the material by 1 °C. Water is a stubborn one.
  • It works in reverse too: the larger c is, the more heating the material does as it cools by 1 °C.
  • Have a goA classmate announces: 'Lead's c is 130 and water's is 4200, so lead is the one that's hard to heat up.' Is she right?

    No. Water is the hard one to heat. Lead warms easily.

    A bigger c means more energy for each 1 °C. Lead's small c means little energy per 1 °C, so it warms quickly.

  • Internal energy is the kinetic energy plus the potential energy of all the particles a substance is made of.
  • Temperature is related to the kinetic energy of individual particles, so temperature and energy are not the same thing.
  • For the same temperature rise, the energy transferred is proportional to the mass. Twice the mass needs twice the energy.
  • Have a goA kettle warms 1 kg of water by 20 °C in 3 minutes. Roughly how long for 2 kg of water by 20 °C with the same kettle?

    6 minutes.

    Twice the mass needs twice the energy for the same temperature rise, and the same kettle takes twice as long to supply twice the energy.

  • Energy transferred is also proportional to the temperature rise and to c.
  • Put it together: ΔE = m c Δθ, with ΔE in J, m in kg, c in J/kg °C and Δθ in °C.
  • Work out Δθ as final minus starting temperature, substitute carefully and multiply. For an unknown, simplify first, then rearrange.
  • Have a goA question says a block warms from 12 °C to 30 °C. Which number goes in for Δθ?

    18 °C (30 − 12).

    Δθ is the change: final minus starting temperature. Neither temperature on its own is the change.

The big picture

Specific heat capacity, c, is a measure of how difficult it is to change the temperature of 1 kg of a material by 1 °C, in J/kg °C. The larger it is, the more energy it takes to warm the material by 1 °C. Temperature is not the same as internal energy, which is the kinetic and potential energy of all the particles. The energy transferred by heating is proportional to the mass, the temperature change and c, which gives ΔE = m c Δθ. To find an unknown, substitute, simplify first, then rearrange.

Key points

1Specific heat capacity (c): how hard it is to change the temperature of 1 kg of a material by 1 °C. Unit: J/kg °C.
2Water 4200, glass 840, iron 450, lead 130 (J/kg °C). The bigger c is, the more energy each 1 °C of warming takes.
3Internal energy is the total kinetic plus potential energy of all the particles. Temperature relates to the kinetic energy of individual particles.
4ΔE = m c Δθ. Δθ is the final temperature minus the starting temperature.
5Finding m, Δθ or c: substitute what you know, simplify first, then rearrange the simpler equation.

Worked example

Problem

A heater transfers 168 000 J to some water and the water's temperature rises by 20 °C. Water has c = 4200 J/kg °C. What is the mass of the water?

⚠ Watch out

Putting a temperature into the equation instead of the temperature CHANGE. A block that warms from 20 °C to 70 °C has Δθ = 50 °C, not 20 or 70.

🧠

Memory hook

c is the stubbornness number: the bigger it is, the more joules every kilogram demands for each 1 °C.

✓

Check yourself

Cover the page. A friend says 'a bath and a mug at the same temperature must hold the same energy.' Explain what is wrong, using the words internal energy and temperature.

Flashcards

(14)
What is specific heat capacity?
A measure of how difficult it is to change the temperature of 1 kg of a material by 1 °C. It is the change in internal energy when 1 kg changes temperature by 1 °C.
What is the unit of specific heat capacity?
Joules per kilogram per degree Celsius (J/kg °C).
Water, glass, iron, lead: what are their specific heat capacities?
Water 4200, glass 840, iron 450, lead 130, all in J/kg °C.
A material has a larger specific heat capacity. What does that do to the energy needed to warm it by 1 °C?
More energy has to be transferred.
A material with a larger c cools by 1 °C. What does that do to the heating it does?
It does more heating as its temperature falls by 1 °C.
What is internal energy?
The sum of the kinetic energy and potential energy of the particles a substance is made of.
What is temperature related to?
The kinetic energy of the individual particles. It is a measure of how hot a substance is.
What are temperature and internal energy, in one line?
Not the same thing: temperature relates to individual particles, internal energy is the total for all of them.
Heating the same substance by the same temperature rise: how does the energy transferred depend on the mass?
It is proportional to the mass.
Which three things is the energy transferred by heating proportional to?
The mass, the temperature increase and the specific heat capacity.
Write the equation linking energy change, mass, specific heat capacity and temperature change.
ΔE = m c Δθ
What are the units of ΔE, m, c and Δθ in ΔE = m c Δθ?
ΔE in joules (J), m in kilograms (kg), c in J/kg °C, Δθ in °C.
How do you find Δθ when a question gives two temperatures?
Final temperature minus starting temperature.
Four variables, one unknown. What is the method for rearranging ΔE = m c Δθ?
Substitute the known values and simplify first (for example work out c × Δθ), then rearrange the simpler equation.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Physics topics

See the full AQA Physics curriculum →

How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 12 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students