GCSE · Maths · Edexcel · Spec 1MA1 · Foundation+Higher

Area and volume formulae for triangles, parallelograms, trapezia, prisms

Slice a long triangular chocolate bar anywhere along its length and every slice is the same triangle. Spotting that sameness is the whole trick to finding a volume.

Maths · Solids

Which of these are prisms?

Pick a solid, then pick the box it belongs in. The test is the slice: cut the solid anywhere along its length and look at the cross-section.

Still to sort

A prism (0)

The cross-section is a polygon, and it is the same all the way through.

Where the line is: Both tests must pass: the cross-section is a polygon AND it never changes along the length.

Same all the way through, but not a prism (0)

The cross-section never changes, but it is not a polygon.

Where the line is: This is the sneaky group. The cross-section is constant, but a circle or a semicircle is not a polygon, so these solids fail the prism test. The volume method still works on them: area of the cross-section × length.

Cross-section changes size (0)

The slices are the same shape but get bigger or smaller along the length.

Where the line is: Same shape is not enough. If the size changes, the cross-section is not the same all the way through, so it is not a prism either.

7 of 7 still to sort.

Spoiler: one group turns out stranger than you'd expect.

Maths · Cross-section areas

Which area rule would you use?

A parallelogram has a base of 8 cm. Its slanted side is 5 cm long. The perpendicular height between the base and the opposite side is 4 cm.

You need its area. Which is closest to what you would do?
How sure are you?

Worked example · An L-shaped prism, two ways

Problem

The end face of a prism is an L-shape. Round the outside it is 9 cm wide and 7 cm tall. Its bottom bar is 2 cm tall and its upright bar is 3 cm wide, so the missing corner is 6 cm wide and 5 cm tall. The prism is 10 cm long, measured at right angles to the L. Find its volume in two different ways.

Predict, then check

No calculating needed. Just decide which of the numbers can actually change.

A prism has a cross-section of area 18 cm² and a length of 5 cm, so its volume is 90 cm³. Now stretch it so that only the length is tripled, to 15 cm. What happens?

Maths · Cylinders and semicylinders

Find the line where it goes wrong

A semicylinder has a semicircular end with a diameter of 10 cm. It is 8 cm long, measured at right angles to the semicircle. Find its volume, leaving π in your answer.

A student's answer — which line goes wrong?

Maths · Working backwards

Find the missing side

A prism has a volume of 300 cm³ and a length of 12 cm. Its cross-section is a trapezium with parallel sides a cm and 6 cm, and 5 cm between the parallel sides. Find a.

  1. V = A × l, so 300 = A × 12.
  2. missing step
Which line is step 2?

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

What you need to know

  • A prism has a polygon as its cross-section, and that cross-section stays exactly the same all the way through.
  • A cylinder's cross-section is a circle, and a circle is not a polygon, so a cylinder is not a prism.
  • Have a goA solid's slices are all the same-sized pentagon, all the way along its length. Prism, or not a prism?

    A prism.

    A pentagon is a polygon and every slice is identical, so both halves of the test are passed. A circle would have failed the polygon half.

  • For triangles and parallelograms, use the perpendicular height, never the slanted side: triangle ½ × b × h, parallelogram b × h.
  • Have a goMaya says, very confidently, that a triangle with base 10 cm, slanted side 7 cm and perpendicular height 6 cm has area ½ × 10 × 7 = 35 cm². Is she right?

    No. The area is ½ × 10 × 6 = 30 cm².

    Maya grabbed the slanted side because it looks like a height. The formula only ever takes the perpendicular height.

  • Trapezium: add the parallel sides, multiply by the perpendicular distance between them, then halve. A = ½ × (a + b) × h.
  • The volume of a prism is its cross-sectional area × its length: V = A × l.
  • Have a goA prism has a cross-section of area 15 cm² and is 8 cm long. What is its volume, with units?

    120 cm³

    Area × length = 15 × 8 = 120, and a volume is measured in cubic units, so cm³ rather than cm².

  • Multiply by the length that is perpendicular to the cross-section, even if the question calls it the height or the depth.
  • Cross-sectional area is measured in square units, while volume is measured in cubic units.
  • Stretch only the length by scale factor k and the volume is multiplied by k, while the cross-section's area stays the same.
  • Cylinders have a constant cross-section too, so V = πr²h; if you are given the diameter, halve it first.
  • Working backwards, divide the volume by the length to get the area, or by the area to get the length.

The big picture

A prism has a polygon cross-section that stays exactly the same all the way through. Its volume is the area of that cross-section multiplied by the length at right angles to it: V = A × l. You find the area with the triangle, parallelogram or trapezium formula, always using the perpendicular height. A cylinder is not a prism, but its constant circular cross-section means the same method gives V = πr²h. Run it backwards and you can find a missing area, length or radius.

Key points

1A prism: a polygon cross-section that is identical all the way through. A cylinder (circle) is not a prism.
2Triangle ½bh, parallelogram bh, trapezium ½(a + b)h, always with the perpendicular height.
3Prism volume V = A × l, with l measured perpendicular to the cross-section.
4Cylinder V = πr²h (halve the diameter first); a semicylinder is half of that.
5Backwards: area = volume ÷ length and length = volume ÷ area; solve V = πr²h for a missing value.

Worked example

Problem

A prism has a triangular cross-section with base 6 cm, perpendicular height 4 cm and a slanted side of 5 cm. The question says the prism has a height of 15 cm, measured from one triangular end to the other. Find its volume.

⚠ Watch out

Grabbing whichever length is handy. A slanted side is not a perpendicular height in an area formula, and a prism's length has to be the one at right angles to the cross-section.

🧠

Memory hook

Find the slice, find its area, then run it along its length: slice, area, length.

✓

Check yourself

Sketch a solid with a trapezium cross-section and say which length you multiply its area by. Then say what you would do if you were given the volume and the length instead.

Flashcards

(13)
What makes a solid a prism?
A polygon cross-section that stays exactly the same all the way through, so every slice parallel to the base is identical.
A solid's cross-section is the same circle all the way along. Is it a prism?
No. The cross-section is constant, but a circle is not a polygon. Its volume is still found as cross-sectional area × length.
Area of a triangle?
½ × base × perpendicular height.
A parallelogram's slanted side is marked on the diagram. Why must you not use it in the area?
The formula needs the perpendicular height, the distance at right angles to the base: area = base × perpendicular height.
How do you find the area of a trapezium?
Add the parallel sides, multiply by the perpendicular distance between them, then halve: A = ½ × (a + b) × h.
Volume of a prism?
V = A × l: the area of the cross-section × the length of the prism.
Which length do you multiply the cross-sectional area by?
The one perpendicular to the cross-sectional face, whether the question calls it the length, the height or the depth.
What units go with cross-sectional area and with volume?
Square units for the area (such as cm²) and cubic units for the volume (such as cm³).
A prism is stretched by scale factor k along its length. What happens to its volume and its cross-sectional area?
The volume is multiplied by k. The area of the cross-section is unchanged.
Two ways to find the volume of a composite rectilinear prism?
Find the area of the composite cross-section and multiply by the length, or split the prism into cuboids and total their volumes. Both give the same answer.
Volume of a cylinder, and what do you do first if you are given the diameter?
V = πr²h. Halve the diameter to get the radius before doing anything else. The answer may be left in terms of π.
How do you find the volume of a semicylinder?
Find the volume of the full cylinder and halve it: a semicylinder is a cylinder cut in half through a diameter of its circular base.
The volume and one other measurement are known. How do you find a missing area, length, radius or height?
Prism: area = volume ÷ length, or length = volume ÷ area. Cylinder: substitute the two known values into V = πr²h and solve for the third.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More Edexcel GCSE Maths topics

See the full Edexcel Maths curriculum →

How this lesson was checked. This Edexcel GCSE Maths (specification 1MA1)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 8 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students