GCSE · Maths · Edexcel · Spec 1MA1 · Foundation+Higher

Constructing congruent and similar shapes

Three pairs of shapes: one turned, one blown up, one with its angles in a different order. Which pairs are really the same shape?

Maths · Congruent or similar?

Similar, congruent, or neither?

Each item is a pair of shapes, an object and its image. Tick every set the pair belongs in: one, both or neither. For each pair, ask yourself: do the angles stay the same, and is every side multiplied by the same number?

  • A Similar
  • B Congruent
  1. A shape and its enlargement with scale factor 3
  2. A shape and its image after a rotation
  3. Two rectangles: 4 cm by 2 cm and 6 cm by 2 cm
  4. A shape and its enlargement with scale factor −1
  5. A shape and its enlargement with scale factor ½
  6. A shape and its image after a translation
  7. Two shapes with the same angles, but in a different order however you go round
  8. A shape and its enlargement with scale factor −2
  9. A shape and its reflection
  10. A shape and its enlargement with scale factor 1
  11. A triangle and a quadrilateral

Maths · One multiplier

One multiplier for every pair of sides
0 cm1 cm2 cm3 cm4 cm5 cm6 cmdrag to pick an object length →

Object length: 2/6. Object length 2 cm. Matching image length 6 cm. Image ÷ object 6 ÷ 2 = 3

Object length2 cmMatching image length6 cmImage ÷ object6 ÷ 2 = 3

A shape is enlarged by scale factor 3. Drag to choose any length on the object. Its matching length on the image keeps pace, and image ÷ object never changes.

Maths · Rotation

Where does this rotation go wrong?

A student rotates triangle ABC, with A(1, 1), B(3, 1) and C(1, 2), through 90° clockwise about the centre (0, 0). One line of the working goes wrong. Which one?

A student's working — which line goes wrong?

Maths · Enlargement

Enlarge it from a centre

Enlarge triangle PQR, with P(2, 1), Q(4, 1) and R(2, 3), by scale factor 2 from the centre of enlargement O(0, 0). Fill in the missing steps.

  1. Draw a ray line from O(0, 0) through each vertex of the object: through P(2, 1), through Q(4, 1) and through R(2, 3).
  2. missing step
Which line is step 2?

Maths · Negative and fractional scale factors

What do these scale factors really do?

A triangle is enlarged from a centre of enlargement. You are told the scale factor.

Which idea about negative and fractional scale factors is closest to what you think?
How sure are you?

Maths · Describe fully

Write the full description

Triangle S has vertices (2, 1), (4, 1) and (2, 2). (a) Triangle T has vertices (−1, 2), (−1, 4) and (−2, 2). T is the same size as S, is not flipped over, and faces a different way. Describe fully the single transformation that maps S onto T. (Test a centre with tracing paper.) (b) Triangle U has vertices (4, 3), (10, 3) and (4, 6). Describe fully the single transformation that maps S onto U. [6 marks]

0 words · your answer stays on this page and is not sent anywhere.

Exam line: A description that names the transformation but leaves out the centre, the angle, the direction or the scale factor loses marks for each missing piece.

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

One question decides it: do the angles stay the same, and is every side multiplied by the same number?

What you need to know

  • In a transformation, the starting shape is the object and the shape you end up with is the image.
  • Congruent shapes are identical in shape and size: one fits exactly on top of the other using rotation, reflection or translation.
  • Have a goA classmate says, 'If you have to flip a shape over to match it up, it can't be congruent.' Are they right?

    No. A reflection is one of the three ways a congruent image can be made.

    Congruent shapes are identical in shape and size, and one fits exactly on top of the other using rotation, reflection or translation. Flipping is allowed.

  • Congruent means equal angles in the same order and equal corresponding sides. One difference in any of them and the shapes are not congruent.
  • Similar shapes differ only in size: equal angles in the same order, and every pair of corresponding sides has the same scale factor.
  • Congruent shapes are similar shapes with a scale factor of one, so congruence is a special case of similarity.
  • Have a goShape B is shape A enlarged by scale factor 1. Is B similar to A, congruent to A, or both?

    Both.

    Congruent shapes are similar shapes with a scale factor of one, so a pair with scale factor 1 passes the test for similar and for congruent.

  • A rotation needs a centre, a direction and an angle. Clockwise is the way a clock's hands travel.
  • An enlargement needs a centre and a scale factor. Every image vertex lies on the ray line from the centre through its object vertex.
  • An enlargement with a scale factor between 0 and 1 gives a smaller image. It is still called an enlargement.
  • A negative scale factor puts the image on the other side of the centre, turned through 180°. The size comes from the number, ignoring the sign.
  • Have a goA shape is enlarged by scale factor −3. Is the image bigger or smaller than the object, and which side of the centre does it land on?

    Bigger (three times the size), on the other side of the centre.

    The minus sign decides the side of the centre, not the size. The size comes from the 3, and 3 is greater than 1, so the image grows.

  • A full description names the transformation. A rotation also needs angle, direction and centre; an enlargement needs scale factor and centre.

The big picture

Two shapes are congruent if one fits exactly on top of the other, and similar if the only difference is size. Congruent shapes are just similar shapes with a scale factor of 1. You will also learn to perform and fully describe rotations and enlargements, including fractional and negative scale factors.

Key points

1Congruent: equal corresponding angles in the same order, and equal corresponding sides.
2Similar: equal corresponding angles in the same order, and one scale factor for every pair of corresponding sides.
3Congruent = similar with a scale factor of 1. Rotation, reflection and translation give congruent images.
4Rotation: centre, direction, angle. Enlargement: centre and scale factor, with the image on the ray lines from the centre.
5The image is smaller only when the scale factor, ignoring its sign, is between 0 and 1. A negative sign moves it to the other side of the centre.

Worked example

Problem

Rectangle A is 4 cm by 6 cm. Rectangle B is 10 cm by 15 cm. Are they congruent, similar or neither?

⚠ Watch out

Deciding that two shapes have angles in a different order after checking only one direction. Go round the other way as well before you decide they differ, because a reflected shape reads its angles the opposite way round.

🧠

Memory hook

Congruent is similar with scale factor 1: the same test for both, the same angles in the same order, and one multiplier for every pair of sides.

✓

Check yourself

An object is enlarged by scale factor −½. Which side of the centre is the image on, and is it bigger or smaller? Answer: the other side, half the size.

Flashcards

(15)
Object and image
In a transformation, the starting figure is the object and the resulting figure is the image.
When are two shapes congruent?
When one fits exactly on top of the other using rotation, reflection or translation: identical in shape and size.
What must match for congruent shapes?
All pairs of corresponding angles equal and in the same order, and every pair of corresponding sides equal in length.
Why is 'not congruent' often easier to show?
One difference is enough: a different shape, a different angle, angles in a different order, or one different side length.
How do you compare the order of the angles?
Start at one angle and go clockwise or anticlockwise, noting each angle. If the orders don't match, try the opposite direction before deciding they differ.
What can differ between similar shapes?
Only the size (and orientation, or a reflection). The angles stay equal in the same order, and every pair of sides shares one scale factor.
Same angles, but one pair of sides has a different multiplier from the rest. Similar?
No. Every pair of corresponding sides must have the same multiplier. A ratio table can check them.
How are congruence and similarity linked?
Congruent shapes are similar shapes with a scale factor of one: congruence is a special case of similarity.
A single transformation joins two shapes that are similar but not congruent. What is it?
An enlargement.
What are the three common rotation errors?
Using the wrong centre, turning in the wrong direction, and turning by the wrong amount.
How do you rotate with tracing paper?
Trace the object and the centre, turn the paper about the centre through the angle in the given direction, then mark each image vertex.
What is a full description of a rotation?
Say it is a rotation, then give the angle, the direction and the centre (as coordinates). For a half turn (180°) no direction is needed.
How do you find a scale factor, and the centre of enlargement?
Scale factor = a length on the image ÷ the corresponding length on the object. The centre is where the ray lines through corresponding vertices meet.
Scale factor −2: where does the image go, and how big is it?
On the other side of the centre, turned through 180°, and twice the size of the object.
When is an enlargement's image smaller than the object?
Only when the scale factor, ignoring its sign, is greater than 0 and less than 1. A negative sign alone never makes it smaller.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More Edexcel GCSE Maths topics

See the full Edexcel Maths curriculum →

How this lesson was checked. This Edexcel GCSE Maths (specification 1MA1)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 19 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students