GCSE · Maths · Edexcel · Spec 1MA1 · Higher

Combinations of transformations

Slide a shape across, then spin it. Now spin first, slide second. Same two moves, so same finish? Drag the board above and see.

Maths · Transformations

Same two moves, opposite order
1.54.51.13.4xyOA (1, 1)A′ (5, −1)A″ (−5, 1)A1′ (−1, −1)A1″ (3, −3)P₁P₂

P₁ to A 1.5. P₁ to A″ 4.5. P₂ to A 1.1. P₂ to A1″ 3.4. Relationship: Each final image is a single 180° rotation of the object, so its centre sits exactly halfway between A and its image. Slide P₁ and P₂ until each pair of readouts match: that is where the centre is.

P₁ to A1.5P₁ to A″4.5P₂ to A1.1P₂ to A1″3.4Slide P₁ and P₂ until the readouts match.

Each final image is a single 180° rotation of the object, so its centre sits exactly halfway between A and its image. Slide P₁ and P₂ until each pair of readouts match: that is where the centre is.

Route 1: translate by the vector (4, −2), then rotate 180° about the origin O (A → A′ → A″). Route 2: rotate 180° about O first, then translate by (4, −2) (A → A1′ → A1″). The orange triangle is the object, the two dark ones are the final images and the pale ones are the middle images.

Watch out: The triangles stay put. Only P₁ and P₂ move — they slide along the line joining A to each final image.

Maths · Transformations

What does a full description need?

Four transformations, five possible ingredients. Tick every ingredient that a full description of each transformation has to state, then check.

Translation
Rotation
Reflection
Enlargement

Exam line: A transformation is only fully described when every ingredient is stated. Each type has its own set.

Maths · Transformations

Find the second transformation

Triangle ABC has A(2, 1), B(4, 1) and C(2, 2). It is rotated 90° clockwise about the origin to give A′B′C′. A second transformation then maps A′B′C′ onto A″B″C″, where A″ is (−2, −2), B″ is (−2, −4) and C″ is (−1, −2). Describe the second transformation fully.

  1. The second transformation acts on the middle image, so first I need A′B′C′.The first transformation is given, so do it before anything else.
  2. missing step
Which line is step 2?

Exam line: Do the first transformation yourself. Then compare that middle image with the final image.

Maths · Transformations

Where does the mark go?

Triangle T is mapped onto triangle U by a rotation of 90° clockwise about the point (1, 2). A student writes out how they would describe the transformation. One line costs them the mark. Which one?

A student's answer — which line goes wrong?

Exam line: Check that your answer states everything its transformation needs.

Predict, then check

Think about what the triangle looks like either side of the mirror line.

The isosceles triangle with vertices (3, 10), (7, 10) and (5, 13) has a vertical line of symmetry, x = 5. It is reflected in the line y = 8. Which statement about that image is true?

Maths · Transformations

How many points stay put?

Pick a case, then pick how many of its points are invariant. A point is invariant if it is in the same place before and after the transformation.

Still to sort

No invariant points (0)

Every point moves.

One invariant point (0)

Exactly one point stays put.

A collection of invariant points (0)

Several points stay put, such as every point on an edge or a segment.

Every point invariant (0)

The whole shape stays exactly where it was.

13 of 13 still to sort.

Exam line: Invariant points come in four answers: none, one, a collection, or every point.

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

Do two transformations in a row, and find out why swapping them can change where the shape ends up.

What you need to know

  • The object is the starting shape. The image is what you get after a transformation.
  • Do two transformations in turn: the second acts on the first image, not on the object.
  • Have a goDev says: 'In a two-step transformation, I do the second step on the original shape too.' Triangle ABC is reflected, then rotated. What does Dev get wrong?

    The rotation acts on the reflected image, not on the original ABC.

    Each step works on the latest image, so the first transformation is never thrown away.

  • Label as you go: A becomes A′, then A″. A1 can label that corner on a second image of the same object.
  • Order matters: the same two transformations in the opposite order can put the final image somewhere else.
  • Have a goP is at (2, 1). Translate it by (0, 3), then reflect it in the x-axis. Now swap the order. Where does P end up each time?

    (2, −4) with translate first, (2, 2) with reflect first.

    The second step acts on a different point depending on the order, so the finishing places differ.

  • Two transformations can sometimes be replaced by one single transformation that maps the object straight onto the final image.
  • If the first of two transformations is given, do it, then compare that middle image with the final image to find the second.
  • Spot the type by what changed: moved only is a translation, turned is a rotation, flipped is a reflection, bigger or smaller is an enlargement.
  • Describe fully: translation needs a vector, like (−2, 4) for 2 left and 4 up; rotation, angle, direction and centre; reflection, a line; enlargement, scale factor and centre.
  • Have a goA shape moves 3 units right and 5 units down, and nothing else changes. Write the full description.

    A translation by the vector (3, −5).

    A translation needs its vector: right is positive and down is negative, and "3 and 5" alone has no direction.

  • A symmetric object can have its image described in more than one way, such as a reflection or a 180° rotation.
  • A point is invariant if it stays put. After a transformation there can be none, one, a collection, or every point invariant.

The big picture

Transformations can be done one after another, each acting on the latest image. Swapping the order can change where the final image lands, and two transformations can sometimes be replaced by one. Full descriptions need the right ingredients, and invariant points are the ones that never move.

Key points

1The object is the starting shape and the image is the result; in a sequence, each transformation acts on the latest image.
2Prime notation tracks each stage: A on the object, A′ on the first image, A″ on the next, and A1 on a second image of the same object.
3The order of two transformations matters: the opposite order can change the location of the final image.
4Two transformations can sometimes be replaced by one single transformation, and one final image can be mapped onto another by a translation.
5A full description states the type and its ingredients: translation (vector), rotation (angle, direction, centre), reflection (line), enlargement (scale factor, centre).
6An invariant point stays in the same place: a transformation may leave none, one, a collection or every point invariant.

Worked example

Problem

Triangle T has vertices (2, 1), (4, 1) and (2, 2). Triangle U has vertices (4, 2), (8, 2) and (4, 4). Describe fully the single transformation that maps T onto U.

⚠ Watch out

Doing both transformations on the original object instead of doing the second on the first image, or assuming the order cannot matter. And a rotation or enlargement described without its centre is not a full description.

🧠

Memory hook

Socks, then shoes ends in a different place from shoes, then socks. Transformations can do the same trick: swap the order and the final image can land somewhere else. So always do each move on the latest image, in the order given.

✓

Check yourself

A triangle is reflected in the y-axis, then the image is translated by (3, 0). Which shape does the translation move, and how would you test the opposite order?

Flashcards

(14)
What is the object in a transformation, and what is the image?
The object is the starting figure before a transformation. The image is the figure after it.
In a sequence of two transformations, what does the second one act on?
The first image. The second transformation is done on the image from the first, the third on the new image, and so on.
Vertex A on the object. How are the same vertex on the first and second images labelled?
A′ (A prime) on the first image, A″ (double prime) on an image made from that one. A1 can label it on a second image of the same object.
Does the order of two transformations matter?
It can. The same two transformations in the opposite order can change the location of the final image.
Two transformations in different orders each gave a 180° rotation of the object. How do the two final images relate?
Each is a single rotation of 180° but with a different centre. They have the same size and orientation in different positions, so a translation maps one onto the other.
The first of two transformations is given. How do you find the second?
Do the first transformation to get the middle image, then compare that middle image with the final image.
What does a full description of a translation state?
That it is a translation, and the translation vector, e.g. (−2, 4) is 2 left and 4 up.
What does a full description of a rotation state?
That it is a rotation, the angle in degrees, the direction (clockwise or anticlockwise, unless the angle is 180°) and the centre as coordinates.
What does a full description of a reflection state?
That it is a reflection and the line of reflection, for example as an equation such as y = x.
What does a full description of an enlargement state?
That it is an enlargement, the scale factor and the centre of enlargement as coordinates, found by joining corresponding points on object and image.
When can one image be described in more than one way?
Sometimes when the object has rotational symmetry or lines of symmetry, for example a reflection in a line or a rotation of 180°.
What is an invariant point, and what is an invariant property?
An invariant point stays in the same location before and after the transformation. A property is invariant if it has not changed after the transformation.
Which counts of invariant points are possible after a transformation?
None, one, a collection of points, or every point (the shape is entirely invariant).
A translation by (0, 0) and a translation by any other vector: how many invariant points?
By (0, 0), every point is invariant. By any other vector, no point is invariant.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More Edexcel GCSE Maths topics

See the full Edexcel Maths curriculum →

How this lesson was checked. This Edexcel GCSE Maths (specification 1MA1)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 19 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students