GCSE · Maths · Edexcel · Spec 1MA1 · Foundation+Higher
Plans and elevations of 3D shapes
Look straight down on a cone. Not a triangle. A circle with a dot in the middle. Here's why.
Maths · Solids
Which view is which?
A cuboid block stands on a table. It is 6 cm wide (across the front), 4 cm tall and 3 cm deep (front to back). Here are six flat drawings. Is each one the plan, the front elevation, the side elevation, or none of them?
Still to sort
Plan (0)
What you see looking straight down from above.
Where the line is: The plan looks DOWN at the solid. Both elevations look ACROSS at it.
Front elevation (0)
What you see looking at the solid from the front.
Where the line is: Front and side elevations both look across at the solid. They differ in which face is facing you.
Side elevation (0)
What you see looking at the solid from the side.
Where the line is: The side elevation shows how deep the block is. The front elevation shows how wide it is.
None of them (0)
A drawing this block could never give you.
Commit to each drawing first. The reason shows up after you place it.
Predict, then check
Cones are where gut instinct goes wrong. Commit before you look.
A cone stands on its flat, circular base. You look straight down from above. What is its plan?
WHAT YOU'VE LEARNED
A quick recap of today's lesson.
Three directions. Three flat drawings. One solid.
What you need to know
- The plan of a solid is the view of it from above.
- The front elevation is the view from the front. The side elevation is the view from the side.
Have a goSam climbs a ladder, looks straight down at a shoebox and sketches what they see. Sam proudly calls it 'the front elevation'. Which view have they really drawn?
The plan.
Looking from above gives the plan. A front elevation needs you to stand at the front and look at the box.
- Each of these is a flat drawing of one view. It shows only what you can see from that direction.
- A view showing three faces at once looks distorted. Rectangles look like parallelograms or trapezia, and farther parts look smaller.
- A view of just one face shows its true shape, so rectangles and right angles are clear.
- To identify the views of a cuboid, use the shapes and the lengths. Parallel edges of a cuboid are equal.
- Once you have identified one view, take it out of the options for the others.
Have a goA cuboid has three possible drawings: 9 by 4, 9 by 2 and 4 by 2 (all in cm). You've worked out the 9 by 4 is the plan. Which two are left for the elevations?
9 by 2 and 4 by 2.
Once one view is identified, it comes out of the options for the others, so only the two remaining drawings are left.
- A cone's plan is a circle with a point at its centre. Both of its elevations are triangles.
- To draw to scale, divide each real length by the scale number. With a scale of 1:50, 700 cm becomes 14 cm.
Have a goScale of 1:50. A real wall is 1000 cm long. How long is it in the drawing?
20 cm.
You divide the real length by 50, you don't multiply: 1000 ÷ 50 = 20.
- The three views don't show what's inside. More than one solid can share the same plan and elevations.
The big picture
A solid can be pinned down on paper by looking at it from above (the plan), from the front (the front elevation) and from the side (the side elevation). Each view shows true shapes and lengths. Together they are useful, but more than one solid can share the same three views, and none of them shows the inside.
Key points
Worked example
Problem
A cuboid has a plan that is 8 cm by 5 cm and a front elevation that is 8 cm by 3 cm. What shape and size is its side elevation?
⚠ Watch out
Mixing up which view is which. The plan looks down from above, and both elevations look across from the front or the side. A second slip is thinking three views always fix one solid. More than one solid can share the same three views.
Memory hook
Plan = peering down from above. Elevations = eyes level, front first and then side. And none of them peek inside.
Check yourself
Say which direction gives the plan, the front elevation and the side elevation. Then explain why a cone's plan isn't a triangle.
Flashcards
(14)What is the plan of a solid?
From where do you look to get a front elevation, and from where for a side elevation?
What happens to a rectangle in a view that shows three faces at once?
Why are rectangles and right angles clearer in a plan or an elevation?
Which fact about a cuboid helps you match drawings to views by their lengths?
You've just identified one view of a cuboid. What do you do with that drawing?
What is the plan of a cone?
What do a cone's front and side elevations look like?
Do squared paper and isometric paper change the measurements of a drawing?
How do you turn a real length into a length on a scale drawing?
How can an isometric drawing be used with a plan and elevations?
Can curves be drawn on isometric paper?
If you're given a plan and two elevations, is there only one possible solid?
Do plans and elevations show what's inside a solid?
Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.
Learning with Lightbulb is opening soon
You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.
Keep me postedMore Edexcel GCSE Maths topics
- Combinations of transformations
- Congruence criteria for triangles
- Constructing congruent and similar shapes
- Conventional geometric terms and notation
- Geometrical problems on coordinate axes
- Measuring lines, angles and bearings
- Properties of quadrilaterals and triangles
- Pythagoras' theorem and right-angled trigonometry
- Sine rule and cosine rule
- Standard ruler-and-compass constructions and loci
- Standard units of measure
- Vector arithmetic
How this lesson was checked. This Edexcel GCSE Maths (specification 1MA1)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 14 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.