GCSE · Physics · AQA · Spec 8463

Terminal velocity (physics only)

Drop a plastic bead into a tall column of water and film it. It speeds up, then suddenly settles to a steady sink. Why does it stop getting faster?

Speeding up less and less, never slowing down

02.557.51002.557.510Time since release (illustrative scale)Velocity (illustrative scale)(5, 7.6)

Time since release (illustrative scale): 5. Velocity (illustrative scale): 7.6

Slide the dot along the curve. The height only ever goes up, even where the curve flattens. (The numbers are just a scale to show the shape.)

Gradient = acceleration: The red line shows how steep the graph is at release. Steep means a big acceleration, because drag is small next to the weight, so the resultant force is large. Slide the dot to the right: the curve bends away from the red line and gets shallower as drag grows, until it is perfectly flat at terminal velocity, where the acceleration and the resultant force are both zero.

Watch out: The curve flattens, but it never turns downwards. Flat means the speed has stopped increasing and is now constant. It does not mean the object has slowed down or stopped.

Relationship matrix

Tap any cell to reveal it. Tap a column header to read one property down every item.

Drag compared with weightResultant forceAcceleration
Just releasednot moving yet
Speeding updrag growing
Terminal velocitymaximum speed

Each cell hides a short answer and the reason behind it. Predict before you tap.

Physics · Forces and motion

From drag to acceleration

A 4.0 kg object has just been dropped and is speeding up. At this moment the drag on it is 14 N. Find its acceleration. Use g = 9.8 N/kg.

  1. Step 1: Weight
  2. Step 2: Resultant force
  3. Step 3: Acceleration
  4. Final question: On your own
What you are given
QuantityValue
Mass4 kg
Drag at this moment14 N
Gravitational field strength9.8 N/kg
  1. Step 1 of 3: Weight

    First find the weight of the object. Weight is the force that stays constant.

    Give your answer to 3 significant figures. Choose its unit.

  2. Step 2 of 3: Resultant forceOpens when the step before it is right.
  3. Step 3 of 3: AccelerationOpens when the step before it is right.

Finding terminal velocity with a bead

Step through the practical in order.

  1. Film the fallFilm the bead falling beside a ruler and a stop clock, so that every frame shows both its depth and the time.
  2. Read the depthPlay the film back and read the bead's depth below the surface at fixed time intervals, such as every 0.1 s.
  3. Find each change in depthFor each interval, work out how far the bead moved by finding the change in depth between one reading and the next.
  4. Find where it levels offTerminal velocity is the point after which the calculated velocity is no longer increasing and stays constant.

Physics · Forces and motion

What is happening to the stone?

A stone is dropped from the top of a tall cliff. At first it speeds up. Later, it falls at a steady speed.

Which is closest to what you think is going on?
How sure are you?

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

Why a falling object stops speeding up, without ever slowing down

What you need to know

  • Weight is the pull of gravity on the object, and it stays constant whatever the object's speed.
  • Drag (air resistance) pushes against the motion, so on a falling object it acts upwards.
  • At the instant of release there is no drag, because the object isn't moving yet. Drag grows as it speeds up.
  • Have a goDev says: 'A stone has the most drag at the very instant you let go, because that's when gravity is strongest.' Is he right?

    No. At the instant of release there is no drag at all.

    Drag needs motion, and a stone that has only just been released isn't moving yet. Drag grows from nothing as it speeds up.

  • Resultant force = weight − drag, so as drag grows, the resultant force and the acceleration shrink.
  • Have a goA falling object has a weight of 40 N and the drag on it has grown to 15 N. What is the resultant force on it?

    25 N, downwards.

    The resultant force is the weight minus the drag, because drag acts upwards against the weight: 40 − 15 = 25 N.

  • Newton's second law, F = m × a, gives the acceleration as a = F ÷ m.
  • When drag equals the weight, the resultant is zero. The object stops accelerating but keeps falling at its terminal velocity.
  • Have a goTrue or false: at terminal velocity there are no forces acting on the object.

    False. Weight and drag are both still acting.

    They are equal and opposite, so the resultant force is zero. That is different from there being no forces at all.

  • A falling object never slows down on the way: its speed keeps increasing up to the terminal velocity.
  • On a velocity–time graph, the gradient is the acceleration: steep at first, shallower later, zero at terminal velocity.
  • At terminal velocity, drag equals weight, so the maximum drag is W = m × g, with g = 9.8 N/kg on Earth.
  • To measure terminal velocity, film a bead in a tall water column, where the much larger drag makes it lower.

The big picture

A falling object's weight stays constant, but the drag on it grows as it speeds up. The resultant force and the acceleration shrink until drag equals the weight. After that it falls at a constant speed called the terminal velocity. It never slows down on the way there.

Key points

1Weight stays constant. Drag grows with speed, starting from zero at release.
2Resultant force on a falling object = weight − drag. As drag increases, the resultant force and the acceleration decrease.
3Acceleration = resultant force ÷ mass (a = F ÷ m).
4At terminal velocity, drag equals weight, the resultant force is zero and the object falls at a constant speed.
5A falling object does not slow down on the way to terminal velocity. It keeps speeding up until it gets there.
6On a velocity–time graph, gradient = acceleration. It is steep at first, shallower later and zero at terminal velocity.

Worked example

Problem

A 3.0 kg object is falling at its terminal velocity on Earth (g = 9.8 N/kg). What is the drag force on it, and what is its acceleration?

⚠ Watch out

Thinking that a falling object slows down as the air resistance builds up, or that it stops moving at terminal velocity. In fact its speed keeps increasing right up to the terminal velocity, and then stays constant.

🧠

Memory hook

Weight stays put, drag creeps up. The gap between them (the resultant) closes to nothing, and that is the moment speed stops growing.

✓

Check yourself

Without looking back, describe what happens to the weight, the drag, the resultant force and the speed of an object from the moment it is released until it reaches terminal velocity.

Flashcards

(13)
What happens to the weight of a falling object as it speeds up?
Nothing. It stays constant and does not depend on the speed of the object.
Which way does drag act on a falling object?
Upwards, opposite to its motion and opposite to the weight.
Why is there no drag at the instant an object is released?
It isn't moving yet. Drag only appears once the object is moving.
Why does drag increase as a falling object speeds up?
The object has to push more fluid out of the way each second.
How do you find the resultant force on a falling object?
Weight minus drag.
As drag increases, what happens to the resultant force and the acceleration?
Both decrease.
What is terminal velocity?
The constant maximum speed a falling object reaches when drag equals its weight, so the resultant force is zero.
Does a falling object ever slow down on its way to terminal velocity?
No. Its speed keeps increasing up to the maximum, and at no time does it decelerate.
How do you calculate acceleration from the resultant force?
a = F ÷ m, from Newton's second law, F = m × a.
At terminal velocity, how can you find the drag force?
It equals the weight, so calculate W = m × g, using 9.8 N/kg on Earth.
Why measure terminal velocity with a bead in water rather than in air?
In air it can be dozens of metres per second, too fast to measure indoors. Drag in a liquid is much larger, so the terminal velocity is lower.
How do you get the bead's velocity for each time interval?
v = d ÷ t, where d is the change in depth in that interval and t is the interval, for example 0.1 s.
What does the gradient of a velocity–time graph show for a falling object?
The acceleration: steep at first, shallower later, and zero at terminal velocity.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Physics topics

See the full AQA Physics curriculum →

How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 7 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students