GCSE · Physics · AQA · Spec 8463
Pressure due to a column of liquid (p = h ρ g) (physics only, HT only)
Imagine a column of liquid standing on a tiny square at the bottom of a tank. That square holds up everything above it. How much pressure is that?
Physics · Particle model
Liquids and gases: how the particles sit
Switch between a liquid and a gas and compare how close the particles are. Which one could you squeeze into a smaller space?
Selected state
Liquid
Arrangement
Very close together
Spacing
Particles very close
Motion
Can move around each other, so it can flow
Liquid particles are already very close together, so a liquid is not easily compressed. They can still move around each other, which is why a liquid can flow.
Where p = h ρ g comes from
Picture a column of liquid standing on a square of area A at the bottom. The column is as deep as the liquid: its depth is h.
Physics only, Higher tier (AQA 8463, section 4.5.5).
Predict, then check
One block, held completely under a liquid.
A block is held under a liquid. Compare the pressure on its bottom face with the pressure on its top face.
A full calculation, step by step
Problem
A liquid has a density of 1,000 kg/m³. Find the pressure at a depth of 200 m. Use g = 9.8 N/kg.
WHAT YOU'VE LEARNED
A quick recap of today's lesson.
What you need to know
- A fluid is a liquid or a gas: its particles can move around each other, so it can flow.
- Liquid particles are very close together. In a gas, the gaps between particles are much larger than the particles.
- Particles press on a surface by colliding with it. Pressure = force ÷ area, so p = F ÷ A.
- In a gas, more collisions mean greater pressure. Squeeze a fixed amount of gas into a smaller volume and its pressure rises.
Have a goDev shoves the plunger of a sealed syringe in, so the same air has less room. He insists the pressure stays put. Is he right?
No. The pressure goes up.
The same gas in a smaller volume means more collisions with the surface, and more collisions mean greater pressure.
- A gas can be compressed because of those big gaps. A liquid is not easily compressed, because its particles are already very close.
- Pressure in a liquid is due to the weight of the liquid above a point, so it increases with depth.
Have a goOllie dives down in a pool and says the pressure on him must stay the same, because he's the same size all the way down. Spot the problem.
The pressure gets greater the deeper he goes.
The deeper he goes, the more liquid is above him, and the weight of that liquid is what makes the pressure. His own size doesn't change it.
- At any point the pressure is the same size in every direction, and at one depth it is the same everywhere, whatever the container's shape.
- p = h ρ g, with p in N/m², h in m, ρ in kg/m³ and g in N/kg.
Have a goNo calculator needed: a liquid has a density of 1,000 kg/m³ and g is 10 N/kg. What is the pressure at a depth of 2 m?
20,000 N/m²
Multiply the three: 2 × 1,000 × 10 = 20,000, and the units combine to N/m². Adding them instead would give nonsense.
- A submerged object feels more pressure lower down, which gives a resultant upward force called upthrust.
- Floating at rest means upthrust equals weight. An object floats in water if its density is less than water's.
The big picture
Pressure in a liquid comes from the weight of the liquid above a point, so it increases with depth and is the same at the same depth, whatever the container's shape. Build a column of base area A and depth h and the areas cancel, leaving p = h ρ g. That same rule of pressure rising with depth gives a submerged object an upward force, upthrust, and density decides whether an object floats.
Key points
Worked example
Problem
A liquid of density 800 kg/m³ fills a container. The pressure at the bottom is 4,000 N/m². Use g = 10 N/kg. How deep is the liquid?
⚠ Watch out
Saying the pressure rises with depth because the particles get squashed closer together. A liquid is not easily compressed, so that can't be the reason. It's the weight of the liquid above the point, and that is the same at the same depth whatever the container's shape.
Memory hook
Pressure is the weight of the stack above you: height h, density ρ and pull g make p = h ρ g. The picture breaks in one place: liquid pressure acts in every direction, not just down.
Check yourself
Without looking back: why is the pressure near the bottom of a deep tank greater than near the top, and what does the tank's shape do to it?
Flashcards
(14)What is a fluid?
Which has bigger gaps between its particles, a liquid or a gas?
How do the particles of a fluid exert pressure on a surface?
Pressure from force and area: equation and units?
Why does squeezing a fixed amount of gas raise its pressure?
Which fluid can you compress easily, and which not, and what decides it?
Where does the pressure in a liquid come from?
How does the pressure at a point in a fluid depend on direction?
Pressure due to a column of liquid, with units?
In the derivation of p = h ρ g, what happens to the base area A?
Which value of g do you use in a calculation?
What is upthrust, and why does it exist?
What does upthrust equal for an object floating at rest?
When does an object float in water, and why does ice?
Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.
Learning with Lightbulb is opening soon
You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.
Keep me postedMore AQA GCSE Physics topics
- Factors affecting braking distance
- Moments, levers and gears (physics only)
- Momentum (p = m v) (HT only)
- Newton's First Law
- Newton's Second Law (F = m a)
- Newton's Third Law
- Pressure in fluids 1 (p = F/A) (physics only)
- Reaction time
- Resultant forces and resolving forces
- Scalar and vector quantities
- Speed (s = v t)
- Stopping distance
How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 5 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.