GCSE · Physics · AQA · Spec 8463

Pressure in fluids 1 (p = F/A) (physics only)

Squeeze a sealed bag of air and it pushes back, yet a gas is mostly gaps. So what does the pushing? Collisions: a huge number, every second, from every direction.

Squeeze the gas and watch the walls

Lots of room

Room for the gas (volume): 160 cm³. State: Lots of room. 5 hits a second on the moving wall. animating

5 hits a second on the moving wall
Room for the gas (volume)160 cm³

The most room here, so the fewest hits a second of the four. The particles are the same ones moving at the same speed: only the room has changed.

A model, not real life: the number of particles and how fast each one moves never change here (a real gas has vastly more particles). Only the room changes.

Two fluids, side by side

LiquidvsGas
Focus

Can it flow?

Liquid

Yes, because its particles can move around each other

Gas

Yes, because its particles can move around each other

The insight

Both are fluids. A fluid is a liquid or a gas, and that shared flowing is what the word means.

How do the particles move?

Liquid

Very quickly and randomly, in every direction

Gas

Very quickly and randomly, in every direction

How far apart are the particles?

Liquid

Very close together

Gas

Gaps much larger than the particles themselves

What happens if you squash it in a sealed container?

Liquid

Its volume barely changes. A force on it raises its pressure throughout.

Gas

Its volume falls easily, because the particles have big gaps to move into.

Physics · Pressure in a fluid

Which way does the pressure push?

Picture one point inside a gas or a liquid. Which way does the pressure act at that point?

Which idea is closest to what you think right now?
How sure are you?

Physics · Pressure in a fluid

Does the pressure go up or down?

Each change is made to a gas in a container, and nothing else changes. Pick a change, then pick where it belongs. The reason shows either way.

Still to sort

Pressure increases (0)

More collisions each second, or harder ones

Where the line is: The particles hit the surfaces more often, or with greater force.

Pressure decreases (0)

Fewer collisions each second, or weaker ones

Where the line is: The particles hit the surfaces less often, or with less force.

6 of 6 still to sort.

Try it: pressure = force ÷ surface area

The gas in a sealed container pushes on its lid with a force of 1600 N, spread over an area of 0.020 m². Find the pressure on the lid. Then change the numbers and try your own. The solver gives its answer in pascals (Pa), and 1 Pa is 1 N/m².

Finding pressure (Pa)

p = F ÷ A

Answer

p = 1600 ÷ 0.02

= 80000 Pa

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

Where a gas's push comes from, and how to calculate it

What you need to know

  • A fluid is a liquid or a gas, and fluids can flow because their particles can move around each other.
  • Particles in liquids and gases move very quickly and randomly, in every direction.
  • Have a goPriya says, "Water flows, but air can't, because air isn't a liquid." Is she right?

    No. Air is a gas, so it is a fluid too, and it can flow.

    A fluid is a liquid or a gas, and both can flow because their particles can move around each other. Priya's rule is too narrow.

  • Liquid particles are very close together. In a gas, the gaps between particles are much larger than the particles themselves.
  • Each collision between a particle and a surface gives a tiny force. Those forces, spread over the surface's area, are the pressure.
  • At any point in a fluid the pressure is the same size in every direction, because the random collisions even out.
  • Give a gas less room, or add more gas, and it hits the container's surfaces more often, so the pressure goes up.
  • Heat a gas in a fixed volume and its faster particles hit surfaces more often and harder, so the pressure goes up.
  • Have a goA sealed, rigid tin of air is left in a hot car. Does the pressure inside go up, go down or stay the same?

    It goes up.

    Heating makes the particles move faster, so they hit the walls more often and with greater force. The tin is rigid, so the volume cannot change to cancel that out.

  • A gas is easier to compress than a liquid, because a gas has big gaps and a liquid's particles are already very close.
  • Have a goYou block the end of a syringe and push the plunger in. Which is easier to push in: a syringe full of air, or one full of water?

    The syringe full of air.

    Air is a gas, so its particles have big gaps to squeeze into. Water's particles are already very close together, so its volume barely changes.

  • Pressure = force ÷ surface area: the force acting on a surface, divided by the area it acts over.
  • Pressure comes out in N/m² when the area is in m², or in N/cm² when the area is in cm².

The big picture

Pressure in a fluid is the effect of particles colliding with a surface: each collision is a tiny force, and together they act over the surface's area. At a point the pressure is the same size in every direction. Collisions that are more frequent or harder raise it, and pressure = force ÷ surface area.

Key points

1A fluid is a liquid or a gas, and its particles move quickly and randomly in every direction.
2Pressure in a fluid is the effect of countless particle collisions with a surface. At a point it is the same size in every direction.
3A gas's pressure goes up if the mass of gas increases, the volume decreases or the temperature increases.
4pressure = force ÷ surface area, in N/m² or N/cm².

Worked example

Problem

A force of 30 N acts on a surface of area 15 cm². Calculate the pressure on the surface, in N/cm².

⚠ Watch out

Mixing up the units. If the force is in N and the area is in cm², the pressure is in N/cm², not N/m². Name the pressure's unit from the area's unit.

🧠

Memory hook

Pressure is collisions: hit a surface more often or harder, and the pressure goes up.

✓

Check yourself

Without looking back: a fixed mass of gas is squeezed into half its volume at the same temperature. What happens to its pressure, and why, in terms of particles?

Flashcards

(11)
What is a fluid?
A liquid or a gas. Fluids can flow because their particles can move around each other.
How do the particles in liquids and gases move?
Very quickly and randomly, in every direction.
How does the spacing of particles in a liquid compare with a gas?
Liquid particles are very close together. In a gas the gaps are much larger than the particles themselves.
How do the particles of a fluid exert pressure on a surface?
By colliding with it. Each collision gives a tiny force, and these forces acting over the surface's area produce the pressure.
In which direction does the pressure at a point in a fluid act?
It is the same size in every direction, because the constant random collisions even out.
Why does the pressure rise when a gas's particles are closer together?
They collide with the surfaces more often, and more collisions each second give a greater pressure.
What happens to a gas's pressure if you add more gas to the container?
It increases, because more particles collide with the container surfaces more often.
What happens if you push on a gas, and on a liquid, in sealed containers?
The gas compresses easily because of its big gaps. The liquid's pressure rises throughout, but its volume does not noticeably decrease.
Why does heating a gas in a fixed volume raise its pressure?
Its particles move faster, so they hit the surface more often and with greater force.
What is the equation for pressure?
pressure = force ÷ surface area
What units can pressure and area be measured in?
Pressure in N/m² or N/cm². Area in m², or sometimes cm².

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Physics topics

See the full AQA Physics curriculum →

How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 13 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students