GCSE · Physics · AQA · Spec 8463

Moments, levers and gears (physics only)

Push a door right next to its hinge. Now push it at the handle. Same push, very different result. Why?

Start here

One lever: where you push matters
pivotload forceeffort forced (load)d (effort)

View: Push straight down. Showing 5 layers: Lever and pivot, Load force, Effort (straight down), Load distance, Effort distance (straight down)

View

Layers

Explore

Try 'Push at an angle' and watch what happens to the distance.

The effort pushes straight down, at right angles to the lever, so its distance from the pivot is measured along the lever. Effort and load pull the lever opposite ways round.

Switch the view, then tap a part to see what it does.

Moment = force × distance

Cover the quantity you want to find. The other two show how to get it.

Tap the quantity you want to find. The triangle shows you the formula.

÷

Cover moment, force or distance from pivot, at right angles to the force to reveal its rearranged formula, then plug in numbers to solve.

Which idea sounds like yours?

Two ideas that cost people marks

A 20 N force pushes on a lever at some distance from the pivot.

Which of these is closest to what you think right now?
How sure are you?

Balance problem

Problem

A light beam balances on a pivot. On the left, a 40 N downward force acts 0.6 m from the pivot. On the right, a 20 N downward force acts 0.4 m from the pivot, and an unknown downward force F acts 0.5 m from the pivot. All forces act at right angles to the beam. Find F.

Two kinds of lever

Force multipliervsDistance multiplier

Look at where the effort and the load are, then at what you gain and what it costs.

Focus

Where the effort is

Force multiplier

Far from the pivot

Distance multiplier

Close to the pivot

The insight

Start here: the positions decide which kind of lever it is.

Where the load is

Force multiplier

Close to the pivot

Distance multiplier

Far from the pivot

What it increases

Force multiplier

The size of the applied force

Distance multiplier

The distance moved

What it costs

Force multiplier

The load moves through only a small distance

Distance multiplier

The force is decreased

Example

Force multiplier

A crowbar

Distance multiplier

The human arm: elbow as pivot, biceps producing a large force over a small distance

Predict, then check

Gear X has 30 teeth and is meshed with gear Y, which has 10 teeth. X makes one full turn.

How many times does Y turn, and which gear has the larger moment?

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

What you need to know

  • A force can turn something about a pivot. That turning effect is a moment, and a moment is not a force.
  • Moment = force × distance, so M = F d. M is in newton metres (N m), F in newtons (N), d in metres (m).
  • Have a goA classmate works out 20 N × 0.5 m and confidently writes the answer as '10 N'. What should the answer actually say?

    10 N m

    A moment is a turning effect, not a force, so its unit is newton metres. Newtons on their own describe a force.

  • The distance d is measured at right angles to the direction the force acts, not simply along the lever.
  • A force on a lever turns it about the pivot, either clockwise or anticlockwise.
  • Have a goA downward force pushes on the right-hand end of a horizontal lever, pivoted in the middle. Which way does the lever turn?

    Clockwise

    Picture a clock face: on the right-hand side the hands move downwards, so a downward push on the right turns the lever clockwise.

  • Equilibrium means no resultant force and no resultant moment, so a stationary object stays stationary.
  • Principle of moments: when an object is balanced, the clockwise moments about the pivot add up to the anticlockwise moments.
  • Have a goA lever is balanced. The anticlockwise moments about the pivot add up to 18 N m. What do the clockwise moments add up to?

    18 N m

    Balanced means the clockwise total equals the anticlockwise total, however many forces make up each side.

  • A force multiplier has the effort far from the pivot and the load close, as with a crowbar: bigger force, smaller movement.
  • A distance multiplier has the effort close to the pivot and the load far, as with the human arm: bigger distance, smaller force.
  • Gears are toothed wheels that interlock, so turning one turns the next and passes the turning effect on.
  • Meshed gears: a 10-tooth gear turns three times per turn of a 30-tooth gear, and the larger gear has the larger moment.

The big picture

A moment is the turning effect of a force about a pivot, found from M = F d with d measured at right angles to the force. Balanced objects have equal clockwise and anticlockwise moments. Levers and gears use moments to trade force against distance or to change the size of a moment.

Key points

1A moment is the turning effect of a force about a pivot. It is not a force, and it is measured in newton metres (N m).
2M = F d, where d is the distance from the pivot measured at right angles to the direction the force acts - not simply along the lever.
3Changing the direction of the push changes that distance, so it changes the moment.
4A balanced object is in equilibrium: no resultant force and no resultant moment. By the principle of moments, its clockwise moments add up to its anticlockwise moments.
5A force multiplier gives a bigger force over a smaller distance; a distance multiplier gives a bigger distance with a smaller force. Neither gives something for nothing.
6Meshed gears pass on the turning effect: the smaller gear turns more often, but the larger gear has the larger moment.

Worked example

Problem

A force of 60 N acts at right angles to a lever, 0.5 m from the pivot. (a) Find the moment of the force. (b) What force acting at right angles 0.25 m from the pivot would have the same moment?

⚠ Watch out

Writing a moment in newtons, or measuring d along the lever whichever way the force points. A moment is in N m, and d is the distance from the pivot measured at right angles to the direction the force acts.

🧠

Memory hook

Moment = a push AND a place. Same push, further from the pivot and at right angles, turns more. Lever or gear, you can swap force for distance - you can never get something for nothing.

✓

Check yourself

A 25 N force acts at right angles to a lever, 0.8 m from the pivot. What is its moment, and what unit does it need? (20 N m)

Flashcards

(14)
What is a moment?
The turning effect of a force about a pivot. A moment is not a force.
What is the unit of a moment?
The newton metre (N m).
Write the equation for the moment of a force, with units.
M = F d. Moment M in newton metres (N m) = force F in newtons (N) × distance d in metres (m).
In M = F d, which distance do you use?
The distance from the pivot to the force, measured at right angles to the direction the force acts - not simply along the lever.
Why does pushing in a different direction change the moment?
It changes the right-angle distance from the pivot, so it changes the moment.
A 40 N force acts at right angles to a lever 0.5 m from the pivot. What is its moment?
M = F d = 40 × 0.5 = 20 N m.
What does it mean for an object to be in equilibrium?
There is no resultant force and no resultant moment on it, so it is balanced and, if stationary, stays stationary.
State the principle of moments.
For a balanced object, the clockwise moments about the pivot add up to exactly the same size as the anticlockwise moments.
What is a force multiplier?
A lever that increases the applied force, with the effort far from the pivot and the load close (a crowbar). The load moves through only a small distance.
What is a distance multiplier?
A lever that increases the distance moved but decreases the force, with the effort close to the pivot and the load far (the human arm).
Does a lever give something for nothing?
No. A force multiplier makes up for the larger force by moving the load through a smaller distance.
What do gears do?
Toothed wheels on axles that interlock: when one rotates it makes the next rotate, passing the turning effect (moment) from one place to another.
Gear X has 30 teeth and meshes with gear Y with 10 teeth. How often does Y turn per turn of X, and why?
Three times. 30 teeth pass through the connection, so 30 teeth must pass through Y too.
Why does the larger of two meshed gears have the larger moment?
The force between the teeth is the same on both, but the larger gear has a greater radius, so a greater distance from its axle.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Physics topics

See the full AQA Physics curriculum →

How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 7 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students