GCSE · Physics · AQA · Spec 8463
Factors affecting braking distance
Double your speed and you need far more than double the road to stop. Work out why, and every factor in this lesson clicks into place.
Hot brakes
Reason it through
Why can a heavy lorry's brakes fail after a lot of hard braking?
First link · your turn
A moving vehicle has kinetic energy. What has to happen to that energy for the vehicle to stop?
WHAT YOU'VE LEARNED
A quick recap of today's lesson.
What you need to know
- Stopping distance is thinking distance plus braking distance.
- Braking distance is how far the vehicle travels from the moment the brakes are applied until it stops.
- Brakes don't stop a car instantly. The braking force slows it down gradually, so it decelerates.
- Deceleration is braking force divided by mass: more force, more deceleration; more mass, less deceleration.
Have a goQuick sum: a 1,500 kg car brakes with a force of 6,000 N. What is its deceleration?
4 m/s²
Deceleration is force divided by mass: 6,000 ÷ 1,500. It is a division, not a multiplication.
- Less deceleration means a longer braking distance.
- Grip between tyre and road sets the braking force, so worn tyres, wet roads and icy roads lengthen the braking distance.
- For the same braking force, a heavier vehicle decelerates less and has a longer braking distance.
Have a goDev swears a loaded van will stop in a shorter distance than an empty one 'because it's got more weight behind it'. Both brake with the same force. Is he right?
No. The loaded van's braking distance is longer.
With the same braking force, the greater mass gives a smaller deceleration, so the loaded van takes longer to stop.
- Doubling the speed makes braking distance about four times as large, for the same braking force.
- Kinetic energy is ½ × mass × speed squared, so doubling the speed makes it four times as large.
Have a goA car's speed rises from 10 m/s to 20 m/s and its mass stays the same. By what factor does its kinetic energy change?
It becomes 4 times as large.
Speed is squared in ½mv²: 10² = 100 and 20² = 400, so the energy is four times as large, not twice.
- Braking transfers kinetic energy into the brakes' thermal stores, mostly the discs. Overheated brakes can fail.
The big picture
Braking distance is how far a vehicle travels between the brakes being applied and the vehicle stopping. Stopping distance is thinking distance plus braking distance. The braking force slows the vehicle by decelerating it, and deceleration is force divided by mass. Less grip (worn tyres, wet or icy roads) means a lower braking force and a longer braking distance. A greater mass means a smaller deceleration. Doubling the speed makes the kinetic energy and the braking distance about four times as large for the same braking force. The energy is transferred to the thermal stores of the brakes, and overheated brakes can fail.
Key points
Worked example
Problem
Imagine a car of mass 1,000 kg on a road with plenty of grip. Its brakes produce a braking force of 6,000 N. Now its tyres wear and the grip falls, so the braking force falls to 4,000 N. Find the deceleration both times and say what happens to the braking distance.
⚠ Watch out
Believing that doubling the speed doubles the braking distance. Speed is squared in the kinetic energy, so doubling it makes the energy, and the braking distance, about four times as large for the same braking force.
Memory hook
Double the speed, quadruple the stop: it goes in as ×2 and comes out as ×4, because speed is squared.
Check yourself
Without scrolling back: a driver brakes on an icy road. Explain, step by step from the grip, why the braking distance gets much larger.
Flashcards
(11)What is stopping distance?
What is braking distance?
Why doesn't a car stop the instant the brakes are pressed?
How is deceleration found from force and mass?
With the same braking force, what does a greater mass do to deceleration?
How do worn tyres, wet roads and icy roads change braking distance?
Speed doubles and the braking force stays constant. What happens to braking distance?
What is the equation for kinetic energy?
Where does most of a braking car's kinetic energy end up?
Why is it dangerous if brakes overheat?
Why are a lorry's brakes more likely to overheat than a family car's?
Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.
Learning with Lightbulb is opening soon
You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.
Keep me postedMore AQA GCSE Physics topics
- Braking force, energy and dangers (factors affecting braking distance 2)
- Changes in momentum / impulse (F = mΔv/Δt) (physics only, HT only)
- Conservation of momentum (HT only)
- Contact and non-contact forces
- Distance and displacement
- Distance–time graphs
- Moments, levers and gears (physics only)
- Momentum (p = m v) (HT only)
- Newton's First Law
- Newton's Second Law (F = m a)
- Newton's Third Law
- Pressure due to a column of liquid (p = h ρ g) (physics only, HT only)
How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 5 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.