GCSE · Physics · AQA · Spec 8463

Braking force, energy and dangers (factors affecting braking distance 2)

Stamp on the brakes and the car slows, but all that kinetic energy has to go somewhere. Where, and what if there's too much?

Build the web

What decides how a vehicle stops?

Link the factors that act on each other. Start from grip, mass and speed and see where they lead.

  1. Less grip between tyres and road
  2. Smaller braking force
  3. Smaller deceleration
  4. Longer braking distance (outcome)
  5. Greater mass
  6. Greater speed
  7. More kinetic energy to transfer to the brakes
Add a link

No links yet.

Predict first

Commit to an answer, then check it.

A car's speed doubles and its mass stays the same. What happens to its kinetic energy?

Where the energy goes when you brake

Follow the energy, one step at a time. The last step has a different ending to open.

  1. The vehicle is movingIt has kinetic energy = ½ × mass × speed². That is the energy the brakes have to deal with.
  2. The brakes are appliedWork is done by the braking force.
  3. The energy goes into the brakesThe vehicle's kinetic energy is transferred to the thermal stores of the brakes, so the temperature of the brakes rises. Most of the energy ends up in the brake discs.

Which would you say?

Hot brakes

Three things people say about brakes.

Which one is closest to what you think?
How sure are you?

Crumple zones and airbags

?

Reason it through

How do crumple zones and airbags help prevent injuries in a collision?

Link 1 of 3

First link · your turn

Crumple zones crumple on impact and airbags inflate rapidly. What does that do to the time the forces act before the person stops?

2
Locked — reveal the link above first
3
Locked — reveal the link above first

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

What a vehicle's brakes have to deal with, and why too much of it can be dangerous.

What you need to know

  • Braking force makes the vehicle decelerate (a = F ÷ m). A bigger braking force means a bigger deceleration and a shorter braking distance.
  • Mass works against you: for the same braking force, a greater mass means a smaller deceleration.
  • Braking force depends on grip between tyres and road. Worn tyres, wet roads and icy roads reduce grip, so braking distance goes up.
  • Have a goTwo identical cars brake hard, one on a dry road and one on an icy road. Which has the longer braking distance, and why?

    The car on the icy road.

    Ice reduces the grip, which lowers the braking force. A lower braking force means a smaller deceleration, so a longer braking distance.

  • A moving vehicle has kinetic energy = ½ × mass × speed². More mass or more speed means more kinetic energy.
  • Double the speed and the kinetic energy is four times as large, not twice.
  • Have a goYour classmate says: 'Half the speed means half the kinetic energy.' They sound very sure. Are they right?

    No. Half the speed gives a quarter of the kinetic energy.

    The speed is squared, so halving it gives ½ × ½ = ¼ of the kinetic energy.

  • Braking does work: the vehicle's kinetic energy is transferred to the brakes' thermal stores, so their temperature rises, mostly in the discs.
  • Have a goA friend says: 'If a vehicle's brake discs are hot, the brakes must be broken.' Fair?

    No. Hot brakes are what braking produces.

    Braking transfers kinetic energy to the thermal stores of the brakes, so their temperature rises whenever the brakes are applied.

  • Frequent or heavy braking from high speed can overheat the brakes. Overheated brakes can stop working effectively, leading to a loss of control.
  • A heavy lorry is more likely than a family car to overheat its brakes: greater mass, more kinetic energy to transfer.
  • In normal cars that energy is wasted in the thermal stores. Regenerative brakes use a generator to send some of it to a battery for reuse.
  • Extending the time it takes to stop reduces the stopping force. Crumple zones and airbags increase that time, helping to prevent injuries.

The big picture

Braking distance depends on the braking force, which depends on grip, and on the vehicle's mass. The vehicle's kinetic energy, which depends on mass and speed squared, is transferred to the thermal stores of the brakes, so heavy braking from high speed can overheat them. Crumple zones and airbags reduce stopping forces by increasing the time to stop.

Key points

1Braking distance depends on the deceleration: the braking force causes it (a = F ÷ m), so a greater braking force gives a shorter braking distance and a greater mass gives a smaller deceleration.
2The braking force depends on grip, so worn tyres, wet roads and icy roads lower it and increase the braking distance.
3Kinetic energy = ½ × mass × speed²; doubling the speed makes the kinetic energy four times as large.
4Braking transfers kinetic energy to the thermal stores of the brakes, mostly the discs, so their temperature rises; frequent or heavy braking from high speed can overheat them, which is very dangerous.
5Regenerative brakes send some of the energy to a battery for reuse; crumple zones and airbags increase the time forces act, which reduces the stopping forces.

Worked example

Problem

Made-up numbers: a car of mass 1200 kg is moving at 10 m/s. Work out its kinetic energy. Then work it out again at 20 m/s and compare the two.

⚠ Watch out

Thinking that doubling the speed doubles the kinetic energy. The speed is squared in kinetic energy = ½ × mass × speed², so doubling it makes the kinetic energy four times as large.

🧠

Memory hook

Grip sets the braking force. Mass and speed squared set the energy the brakes must take.

✓

Check yourself

Pick three of: worn tyres, an icy road, a greater mass, a greater speed. For each, say what it changes (braking force, deceleration or kinetic energy).

Flashcards

(13)
What causes a braking vehicle's deceleration, and what is the equation?
The braking force causes it: a = F ÷ m.
How does a greater braking force change the braking distance?
It gives a greater deceleration, so a shorter braking distance.
For the same braking force, what does a greater mass do to the deceleration?
It makes it smaller, because a = F ÷ m.
What do worn tyres, wet roads and icy roads do?
They reduce the grip, which lowers the braking force and increases the braking distance.
What is the equation for kinetic energy?
Kinetic energy = ½ × mass × speed².
What happens to kinetic energy when the speed doubles?
It becomes four times as large.
When the brakes are applied, where does the kinetic energy go?
It is transferred to the thermal stores of the brakes, so their temperature rises. Most ends up in the brake discs.
Why can frequent or heavy braking from high speed be dangerous?
The brakes can overheat and stop working effectively, which can lead to a loss of control.
Why is a heavy lorry more likely than a family car to have its brakes overheat?
Its greater mass gives it more kinetic energy, which is transferred to the brakes.
How do regenerative brakes differ from the brakes in a normal car?
A normal car wastes the energy in the thermal stores. Regenerative brakes use a generator to send some of it to a battery for reuse.
If a stopping force is increased, what happens to the time it takes an object to stop?
The time decreases.
What does extending the time it takes to stop do to the stopping force?
It reduces the size of the stopping force.
How do crumple zones and airbags help prevent injuries?
They increase the time the forces act before the person stops, which reduces the stopping forces.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Physics topics

See the full AQA Physics curriculum →

How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 13 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students