GCSE · Physics · AQA · Spec 8463

Diodes

Picture a door that only opens one way, and even then needs a firm shove. That's a diode. Drag the dot and watch for the shove.

A diode's I–V graph

-3-2-101-200204060Potential difference across the diode (V)Current (mA)(-1, 0)

Potential difference across the diode (V): -1. Current (mA): 0

Illustrative curve, not measured data. Drag the dot along it from negative p.d. through 0 V and on to positive p.d. What does the current do?

Circuit symbols

The diode and LED symbols
+−positive endnegative endDiodeLEDlight out

Showing 2 layers: Diode, LED

Layers

Explore

Tap a symbol, or one of its parts, to see what it tells you.

Forward or reverse?

Which way is this diode connected?

Pick a connection, then the kind of bias it gives.

Still to sort

Forward-biased (0)

The p.d. across the diode is positive.

Where the line is: Positive p.d. is what makes it forward-biased. The current is still zero until the p.d. passes the threshold.

Reverse-biased (0)

The p.d. across the diode is negative.

Where the line is: A negative p.d. means reverse bias: the diode has a very large resistance, so very little current can flow.

6 of 6 still to sort.

Resistor habits

Which of these is closest to what you think?

You've met ohmic resistors, whose I–V graphs are straight lines through the origin. Now someone shows you a diode's I–V graph.

What do you expect for a diode?
How sure are you?

Now you try

Resistance at two points

Use the curve above (illustrative numbers). At 0.8 V the current is 10 mA, and at 1.0 V it is 40 mA. Find the diode's resistance at each p.d. and compare.

  1. Use R = V ÷ I on one pair of readings at a time. The current goes into the equation in amperes: 10 mA = 0.010 A.
  2. missing step
Which line is step 2?

Check the plan

One line of this plan is flawed

A student writes a plan to measure a diode's I–V characteristic. Which line is the faulty one?

A student's plan — which line goes wrong?

WHAT YOU'VE LEARNED

A quick recap of today's lesson.

The one-way component, and the graph that gives it away

What you need to know

  • A diode only lets current flow one way. Its ends are positive and negative, and current can only go from positive to negative.
  • Diodes are made from semiconductors such as silicon or germanium, which have both metallic and non-metallic properties.
  • An LED is a diode that gives out light. Its symbol is a slightly altered version of the diode symbol.
  • Join the supply's positive terminal to the diode's negative end and no current flows.
  • Forward-biased means the p.d. across the diode is positive, so current can flow. Reverse-biased means the p.d. is negative, so it can't.
  • Have a goA voltmeter shows −2 V across a diode. Is it forward-biased or reverse-biased, and does current flow?

    Reverse-biased, so current is prevented from flowing.

    A negative p.d. across the diode means reverse bias, and reverse bias prevents current.

  • Going forward, the current is zero until the p.d. reaches the threshold p.d. Then it rises rapidly.
  • Have a goA classmate says: "Any positive p.d. switches a diode on, however tiny." Which part of that is wrong?

    A tiny positive p.d. still gives zero current.

    Positive p.d. only makes it forward-biased; the current stays zero until the threshold p.d. is reached.

  • Forward-biased above the threshold, a diode has a very small resistance. In reverse bias it is very large, so very little current flows.
  • A diode is not an ohmic resistor. Its I–V graph isn't a straight line through the origin, because its resistance changes with the p.d.
  • Have a goYou sketch the I–V graphs of an ohmic resistor and of a diode. Which one is the straight line through the origin?

    The ohmic resistor's.

    A diode's graph is not a straight line through the origin, because its resistance changes as the p.d. changes.

  • Find resistance from a pair of readings with R = V ÷ I. A diode's gradient is not 1/R, as the graph isn't a straight line.
  • To measure it, use a milliammeter, as the currents are very small. Reverse the leads to cover 0 V and the maximum p.d. both ways, with many readings.

The big picture

A diode lets current flow one way only. Its I–V graph is flat in reverse and below the threshold p.d., then rises rapidly, so it is not an ohmic resistor and its resistance has to come from a pair of readings.

Key points

1A diode prevents current flowing in one direction: it can only flow from the positive end to the negative end.
2Forward-biased (positive p.d.) allows current, once the p.d. is above the threshold p.d.; reverse-biased (negative p.d.) prevents it.
3A diode is not ohmic: its I–V graph isn't a straight line through the origin, so its resistance changes with the p.d.
4Find R from a pair of readings with R = V ÷ I; the gradient of a diode's graph is not 1/R.

Worked example

Problem

A diode has 0.9 V across it and a current of 20 mA through it (illustrative numbers). What is its resistance at that p.d.?

⚠ Watch out

Treating a diode like an ordinary resistor: expecting a straight-line graph and reading 1/R from the gradient. The graph isn't a straight line, so find resistance from a pair of readings with R = V ÷ I.

🧠

Memory hook

A one-way door with a stiff spring: it won't open backwards at all, and forwards it won't budge until the p.d. passes the threshold, then it swings wide open. It's only a picture, so don't push it further than that.

✓

Check yourself

Sketch a diode's I–V graph. Mark the zero-current regions, the threshold p.d. and the rapid rise, then say why it isn't ohmic.

Flashcards

(12)
What does a diode do to current?
It prevents current flowing in one direction.
Which way can current flow through a diode?
Only from its positive end to its negative end.
What are diodes made from?
Semiconductors such as silicon or germanium, which have both metallic and non-metallic properties.
What is an LED?
A type of diode that gives out light. Its symbol is a slightly altered version of the diode symbol.
The p.d. across a diode is negative. Forward or reverse bias?
Reverse-biased, which prevents current from flowing.
What is the threshold p.d.?
The p.d. at which a diode allows current to flow. Below it, in the forward direction, the current is zero; above it, the current rises rapidly.
What is a diode's resistance when forward-biased with a p.d. above the threshold?
Very small.
What is a diode's resistance in reverse bias?
Very large, so very little current can flow.
Why is a diode not an ohmic resistor?
Its I–V graph is not a straight line through the origin, because its resistance changes as the p.d. changes.
How do you find a diode's resistance from its I–V graph?
Take a pair of readings and use R = V ÷ I. The gradient is not 1/R, because the graph is not a straight line.
Why use a milliammeter instead of a normal ammeter for a diode?
The currents through the diode are going to be very small.
What range of p.d. should you use to investigate a diode?
0 V and the maximum p.d. in both directions, with positive and negative values and at least four other readings. Many more is good practice.

Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.

Learning with Lightbulb is opening soon

You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.

Keep me posted

More AQA GCSE Physics topics

See the full AQA Physics curriculum →

How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 13 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.

Helpful guides for parents and students