GCSE · Physics · AQA · Spec 8463
Energy transfers in everyday appliances (E = P t and E = Q V)
A 3 W lamp sends 3 joules into the room every second. Ten seconds on? That's 30 J. Watts are just joules counted per second.
Physics · Energy and power
Drag the time a lamp has been switched on. Watch the energy it has transferred keep pace, and compare a 3 W lamp with a 6 W lamp.
Predict, then check
Two kettles, same job. Commit to an answer before the reveal.
Kettle B is more powerful than kettle A. Both heat the same amount of water by the same number of degrees. Which statement is true?
Worked example: a lamp left on for minutes
Problem
A 50 W lamp is switched on for 4.0 minutes. How much energy does it transfer?
Where P = I V comes from
Current is the charge that flows each second: coulombs per second.
WHAT YOU'VE LEARNED
A quick recap of today's lesson.
What you need to know
- Power is the energy transferred each second. It is measured in watts (W): one watt is one joule per second.
- A kilowatt (kW) is 1000 watts.
Have a goA heater is labelled 2 kW. How many joules does it transfer every second?
2000 J
A kilowatt is 1000 W, so 2 kW is 2000 W, and each watt is one joule per second. The 2 on its own would miss the 'kilo'.
- A 3 W lamp transfers 3 J to the surroundings every second. A more powerful appliance transfers energy more quickly.
- Power and energy are different quantities. Power is the rate; energy is the amount transferred.
Have a goDylan announces that his 100 W lamp 'definitely uses more energy' than your 10 W lamp. What is missing from his claim?
How long each lamp is switched on.
Power is only the rate, so the total energy depends on the time as well. The 100 W lamp transfers energy faster, but that alone doesn't tell you the total.
- To find power, divide the energy transferred by the time taken: P = E / t, in watts, joules and seconds.
- Multiply both sides by time and you get E = P t. Time has to be in seconds, so a minute is 60 s.
Have a goSam says a 20 W lamp on for 2 minutes transfers 20 × 2 = 40 J, and he's very sure. What has he forgotten?
To change 2 minutes into 120 seconds, which gives 2400 J.
In E = P t the time has to be in seconds, so 2 minutes is 120 s. Putting a 2 in as the time gives an answer 60 times too small.
- Current is the charge flowing past a point each second: I = Q / t, with charge in coulombs (C) and current in amps (A).
- The p.d. across a component is the energy each coulomb transfers to it: V = E / Q. One volt means one joule per coulomb.
- Rearrange that and you get E = Q V. Mains appliances have 230 V across them, so each coulomb transfers 230 J.
- Combine I = Q / t with V = E / Q and you get P = I V, which is true for any individual component.
The big picture
Power is the energy transferred each second, measured in watts, so P = E / t and E = P t, with time in seconds. Potential difference is the energy transferred by each coulomb of charge, so V = E / Q and E = Q V. Current is charge flowing each second (I = Q / t), and putting these together gives P = I V.
Key points
Worked example
Problem
A charge of 40 C passes through a mains appliance in 20 s. Find the energy transferred to the appliance and its power, then check the power using P = I V.
⚠ Watch out
Treating power as if it were energy. A more powerful appliance does not use more energy for the same job, it uses it up more quickly. And when you use E = P t, don't forget to turn minutes into seconds first.
Memory hook
Watts are joules per second. Volts are joules per coulomb. Every equation here is just counting joules, either second by second or coulomb by coulomb.
Check yourself
Without looking back: a 25 W lamp is on for 40 s. How many joules does it transfer, and how many does it transfer in each second?
Flashcards
(12)What is power?
How many watts are in 1 kilowatt?
How much energy does a 3 W lamp transfer to the surroundings each second?
Why does a more powerful kettle heat the same water in less time?
How do you get from P = E / t to E = P t?
What time unit do these equations need, and how many of them are in a minute?
What does I = Q / t say about current?
What does it mean to say a p.d. is 1 volt?
Write V = E / Q as an equation for energy.
How much energy does each coulomb transfer to a mains appliance?
Two mains appliances have different powers. What is the same and what is different?
Which equation links power, current and p.d., and where does it come from?
Tap any card to flip it, or use Study as deck to go through them one at a time. In the full lesson these run as a spaced-repetition deck — you rate each card Hard, Good or Easy and the tricky ones keep coming back until they stick.
Learning with Lightbulb is opening soon
You can use this lesson now. Join the waitlist and we'll let you know when the full Lightbulb experience is ready.
Keep me postedMore AQA GCSE Physics topics
- Current, resistance and potential difference (V = I R)
- Diodes
- Direct and alternating potential difference
- Electric fields (physics only)
- Electrical power (P = V I and P = I^2 R)
- Ohmic conductors and resistors with changing resistance
- Required practical 4: I–V characteristics
- Series and parallel circuits
- Static electricity and charging by friction (physics only)
- The National Grid
- Thermistors and LDRs
How this lesson was checked. This AQA GCSE Physics (specification 8463)lesson was published through Lightbulb Learning's human-designed editorial process — the educational standards, accuracy rules and publication checks it must pass were authored and approved by Philip Halpin. It passed subject-specific assessment, automated educational checks and technical publication verification before going live (publication checks completed 5 November 2026). Published pages are monitored, human spot-checking is ongoing across the lesson library, and anything found wrong is corrected or withdrawn. How our lessons are made and checked. Spotted a mistake? Email hello@lightbulblearning.co and we'll review it.